|
|
Alcator C-Mod FY2005 Level 1 OFES
Science Target
____________________________________________________________
Target: Measure plasma behavior with high-Z antenna
guards and input power greater than 3.5 MW.
This FY2005 science target
addresses issues related to first wall choices, and the trade-offs between
low-Z and high-Z materials. This choice can affect many important aspects of
tokamak operation, including: impurity content and radiation losses from the
plasma; hydrogen isotope content in the plasma and retention in the walls;
disruption hardiness of device components. All of these issues are significant
when considering choices for next step devices to study burning plasma physics,
especially ITER. Definitive experimental results will be compared to model
predictions, and will be documented in a Target Completion Report in September,
2005.
Quarterly Milestones for target:
Q1: Install molybdenum protection tiles on all
RF antennas and remove boron-nitride tiles from active MHD antennas. (
Status (
The
milestone completion report can be found at:
http://psfcwww2.psfc.mit.edu/cmod/sciprogram/FY05_level1_targets/q1_complete.pdf
Q2: Begin measurements of plasma behavior with
all high-Z antenna guards during tokamak operation. (
Status (
The
milestone completion report can be found at:
http://psfcwww2.psfc.mit.edu/cmod/sciprogram/FY05_level1_targets/q2_complete.pdf
Q3: Assess operation with significant auxiliary
input power for L-Mode and H-Mode plasma regimes. (
Status (
The milestone completion report can be found at
http://psfcwww2.psfc.mit.edu/cmod/sciprogram/FY05_level1_targets/q3_complete.pdf
Q4: Operate with input power in excess of 3.5
MW, measure plasma behavior, compare with previous operation using
boron-nitride protection tiles; document results in a Target Completion Report.
(
Status (
The target completion report can be found at
http://psfcwww2.psfc.mit.edu/cmod/sciprogram/FY05_level1_targets/fy05_target_complete.pdf
____________________________________________________________________
Research supported by USDoE
Office of Fusion Energy Sciences