TORVAC AND DIAGNOSTIC SETUP PROCEDURE: 
Revised 2/18/05 GLD
Revised 5/21/12

.enable ECE on DIAG screen
.open ZBolo
.verify "GV CLOSE IN PULSE" has been toggled off 
.turn on Ratiomatics and toggle AUTO RESTART on G-Side (B_Cross is disabled)
.check NINJA is disabled unless requested in run plan
-->On NINJA screen, B Bottom capillary manifold should be red, 
-->if not, toggle "NINJA" top center of screen
.setup gas system according to daily physop run plan 

*************************************************************************