Alcator C-Mod Run 1021105 Information

Back to runs

Miniproposals
Miniproposal:325
Date Filed:10/1/2002
Title:TF Scan
First Author: Lee
Session Leader: Lee (shots 1-31)

Operators
Session leader(s): Lee
Physics operator(s):Robert Granetz
Engineering operator(s): Unknown

Engineering Operator Run Comment
Boronization recovery, then MP 325: TF Scan/rotation; SL: Lee; PO: Grane

Session Leader Plans

Physics Operators Plans

Session Leader Summaries
Entered: Jul 7 2004 03:49:31:837PM
Author: To Be Determined
Run Sumary for 5 november 2002 (1021105)

Mini Proposal #325: Rotation/TF scan
The purpose of this experiment is to investigate the link between RF
deposition location and the shape of the toroidal rotation
profile. This experiment could possibly show a concrete link between,
RF power deposition, RF power deposition location, and toroidal
rotation.

Shot 001
Boronization recovery
not a terrible shot.

Shot 002
Boronization recovery
nice EDA
some camac problems on K-port spect.

Shot 003
fizzle

Shot 004
more CAMAC problems

Shot 005
continued Camac concerns

Shot 006
Nice shot,
still have Camac problems

Shot 007
Things are all sorted out.
changing field to 5.1 T for next shot
starting the TF scan

Shot 008
TF 5.1 T
some trips on f port spectrometer.
good signal on others.

Shot 009
HV lowered to keep them from tripping,
good looking H-mode, some RF trips but good power

Shot 010
Very good looking shot,
very good rotation data.

Shot 011
TF 4.9 T good data,
very good Statistics

Shot 012
TF 4.9 T better data,
very good Statistics
long EDA

Shot 013
TF 4.7 T double EDA
F- good data, K- good data,
jr-good data

Shot 014
TF 4.7 T double EDA messy though
F- good data, K- good data,
jr-good data

Shot 015
TF 4.5 T messy H-mode. ITB late on
Excellent signals
F- good data, K- good data,
jr-good data

Shot 016
TF 4.5
good signals
very similar to 015

Shot 017
TF 4.6 T
three EDA H-modes
good signals

Shot 018
TF 4.6 T
good signal
again three H-modes

Shot 019
TF 4.6 T
good signal
again three H-modes

Shot 020
TF back to 5.3
h-mode is alittle rough
next will repeat.

Shot 021
TF 5.3 T
h-mode, F-spectrometer tripped
All others are good.

Shot 022
TF 5.5 T
2 h-modes, RF a little ragged
no trips on spectrometers!

Shot 023
TF 5.7 T
rotation signals all seem good.
decent H-mode, RF is not horrible

Shot 024
TF 5.9 T
2 H-modes
ragged RF
field reaches 5.9 at 0.6

Shot 025
TF 5.9 T again
O.K. shot, not much different

Shot 026
TF 5.9 T Again
RF is alittle better,
Spectrometer signals are pretty good.
nice statistics.

Shot 027
TF 6.1 T
Some RF trips, but E-port is just not happy
rotation signals look o.k.

Shot 028
TF 6.1 T
Some RF trips,
rotation signals look o.k, another strange
shot, not as weird as 027 though

Shot 029
TF 6.3 T
Some RF trips,
rotation signals look o.k

Shot 030
TF 6.3 T
Some RF trips,
rotation signals look o.k
two H-modes

Shot 031
TF 6.5 T
Nice Clean RF!!
rotation signals look o.k
two H-modes

Physics Operator Summaries
Entered: Jul 7 2004 04:37:16:817PM
Author: To Be Determined
Physics operator summary for run 1021105 (Tuesday):

Boronization recovery, then
MP 325: TF Scan/rotation

Session leader: D. Lee
Physics operator: R. Granetz
Engineers in charge: G. Dekow/W. Byford

Summary: A very pleasurable day for the physop. Boronization recovery was
a non-issue. Tokamak reliability was excellent; no disruptions; all
shots ramped down completely. We even got through the entire MP.
TF fields varied from 5.3 T down to 4.5 T, and then up to 6.5 T.
At the lower fields, we initially lost the EDA, but increasing the
upper and lower triangularities brought it back. See Davis's report
for the rotation results.

Scorecard: 30 plasmas (No disruptions! All shots ramped down completely)
1 fizzles
0 duds
0 tests
0 aborted and/or screwed up by computer problems
----------
31 total

-------------------------------------------------------------------------------

Engineering setup for Tuesday, 05 Nov 2002

Boronization recovery, then
MP 325: TF Scan/rotation

Session leader: D. Lee
Physics operator: R. Granetz

ECDC overnight in D2 at 2e-4 Torr, stopping by 07:00.
Bake at 60 C overnight as well, if possible.

Run begins at 09:00 and ends at 17:00.

Power systems the same as on 1021029008 (0.9 MA, 5.4 T, lower single null)

Gas setup:
fill B-Top with 6 psi D2 Hybrid enabled (PG4)
fill B-side lower with 1 psi Ar Hybrid enabled (PG1)
fill B-side upper with 10 psi D2 Hybrid DISABLED (PG2) (for ECDC)
fill C-side with 30 psi D2 Hybrid enabled (PG3)
leave J-Bottom as is Hybrid DISABLED (PG5)

Enable the following gate valves, assuming no vacuum problems:
ECE, VUV, DNB

-------------------------------------------------------------------------------
RF Setup: All 3 transmitters Run On by 08:00.

-------------------------------------------------------------------------------
Run Plan: Investigate peak in rotation profile vs RF resonance location.
Try to get EDA H-modes over a range of Btor's, starting at 5.3 T
and dropping down by 0.2 T every couple of shots until we get to
4.1 T. If there's time, raise Btor as high as 6.3 T. We want EDA's,
so we may have to play with triangularity and density a bit. Puff
argon so the Hireces can get rotation profiles.

Start with shot 1021029008, but adjust Ip to 0.8 MA, Btor to 5.3 T,
and argon puff to go from t=0.35 to 0.39 s.

-------------------------------------------------------------------------------

The machine was boronized last evening.
ECDC was done overnight, but no bake.

Hybrid coldstart done by the engineering group; no errors found

Loaded PCS from shot 1021029008 (0.9 MA, 5.4 T, single null lower),
but adjusted Ip to 0.8 MA, Btor to 5.3 T, and
programmed in a 40 ms argon pulse starting at t=0.35 s.

-------------------------------------------------------------------------------

Shot 01 -- Plasma. Good shot. 0.8 MA, 5.3 T, nl_04=1.0-1.2e20 m-2.
E and J each give low power, none from D. No H-modes.
Current rise was a little slow.

Next shot: reduce pre-fill puff by 2 ms.

Shot 02 -- Plasma. Good shot. Steady EDA H-mode. Got 2.1 MW RF, split
amongst D, E, and J.

Next shot: no changes

Shot 03 -- Fizzle. Current rise was still a little slow.

Next shot: reduce pre-fill puff another 2 ms.

Shot 04 -- Plasma. Good shot. Prf=2.0 MW, but there was only a short
H-mode late in the flattop. Current rise was still slow.
Davis tried to fix some camac problems prior to this shot, but
it didn't help.

Next shot: reduce pre-fill another 1 ms.

Shot 05 -- Plasma. Good shot. Long, steady EDA H-mode. Btor=5.3 T still.
Current rise is still slow, but I'll leave it alone for the next
shot.

Next shot: no changes

Shot 06 -- Plasma. Good shot. Another nice long EDA H-mode. Prf<=2.3 MW,
shared amongst all three antennas. Btor=5.3 T still. Current
rise is slightly faster.

Next shot: no changes

Shot 07 -- Plasma. Good shot. Another nice long EDA H-mode. Prf<=2.3 MW.

Next shot: reduce Btor to 5.1 T

Shot 08 -- Plasma. Good shot. Another nice long EDA H-mode. Btor=5.15 T.
Prf<=2.3 MW.

Next shot: tweak Itf down by another 1 kA. Also increase argon
puff by 10 ms (to 50 ms).

Shot 09 -- Plasma. Good shot. Another nice long EDA H-mode. Btor=5.1 T.
Prf<=2.3 MW.

Next shot: no changes

Shot 10 -- Plasma. Good shot. Another nice long EDA H-mode. Btor=5.1 T.
Prf<=2.3 MW.

Next shot: reduce Btor to 4.9 T

Shot 11 -- Plasma. Good shot. Another nice long EDA H-mode. Btor=4.9 T.
Prf=2.3 MW. Jim Irby points out that the radiated power has
been monotonically increasing from it's very low post-boronization
level at the start of the day.

Next shot: no changes

Shot 12 -- Plasma. Good shot. Another nice long EDA H-mode. Btor=4.9 T.
Prf=2.3 MW.

Next shot: reduce Btor to 4.7 T

Shot 13 -- Plasma. Good shot. Two shorter EDA H-modes. Btor=4.66 T.
Prf=2.3 MW.

Next shot: tweak Itf up by 1 kA.

Shot 14 -- Plasma. Good shot. Two EDA H-modes, not as constant as those
at higher fields. Btor=4.7 T. Prf=2.3 MW.

Next shot: reduce Btor to 4.5 T. Leave shape and density the same
for now.

Shot 15 -- Plasma. Good shot. Two non-constant H-modes, not sure if they're
still EDA. An ITB forms towards the end of the latter H-mode
period. Prf=2.3 MW. Btor=4.47 T.

Next shot: tweak Itf up by 1 kA, and increase upper triangularity
by reducing RXU by 2 cm.

Shot 16 -- Plasma. Good shot. Two H-modes, the 2nd one looks like EDA.
Btor=4.5 T. Prf<=2.3 MW. Upper triangularity is 0.42 (It was
0.34 on previous shots.)

Next shot: increase Btor to 4.6 T, and lower triangularity (by
reducing RXL by 1 cm).

Shot 17 -- Plasma. Good shot. Btor=4.61 T. Three H-modes, not very EDA-like.
Lower triangularity increased to 0.55 (was 0.50 on previous shots).
Prf<=2.3 MW. Outer gap has shrunk a few mm since making the
shape changes.

Next shot: increase outer gap by 4 mm (reduce RCUR by 2 mm).

Shot 18 -- Plasma. Good shot. Btor=4.6 T. Three H-modes, the last one
is definitely EDA. Outer gap is back to 1.1 cm, which helped
the RF performance a lot. Prf=2.3 MW.

Next shot: no changes

Shot 19 -- Plasma. Good shot. Btor=4.6 T. Three H-modes, the last one
is definitely EDA. Prf=2.3 MW.

Next shot: go back to Btor=5.35 T by re-loading segment 2 from
shot 07, but keep the argon puff at 50 ms. (Upper and lower
triangularities, and outer gap, will change back from their
current settings.)

Shot 20 -- Plasma. Good shot. Btor=5.35 T. One long EDA H-mode (again).
RF had some problems. Prf=1.0-2.2 MW. Hard x-rays are starting
to appear; current rise is fast.

Next shot: increase pre-fill by 1 ms.

Shot 21 -- Plasma. Good shot. Btor=5.35 T. One long EDA H-mode.
RF had some problems again. Prf=1.0-2.2 MW. Current rise is
still somewhat fast; we still have some hard x-rays.

Next shot: Raise Btor to 5.5 T, increase pre-fill another 1 ms.
Also reduce RCUR by 1 mm to increase outer gap and maybe help RF.

Shot 22 -- Plasma. Good shot. Btor=5.55 T. RF still having problems.
Prf=1.0-2.0 MW. Two good EDA H-modes. Startup is looking
worse for some reason.

Next shot: raise Btor to 5.7 T.

Shot 23 -- Plasma. Good shot. Btor=5.73 T. One long EDA H-mode. RF power is
still not very clean. Prf=1.1-2.0 MW. Alternator crew reported
hearing noises on that shot. Hard x-rays were slightly reduced.

Next shot: raise Btor to 5.9 T, using a finite rampup, rather than
a sudden jump at segment switch. (PLC TF limit has to be raised
to 170 kA.)

Shot 24 -- Plasma. Good shot. Btor=5.93 T. RF had lots of problems. Two
short H-modes. No noises reported from alternator.

Next shot: repeat, except ramp up Btor a bit faster.

Shot 25 -- Plasma. Good shot. Btor=5.92 T. One short EDA H-mode. No noises
reported from alternator. J-port faulted out early. Hard x-rays
are down, even though early current rise is pretty fast. Prf=0.5-
1.0+ MW.

Next shot: repeat, no changes.

Shot 26 -- Plasma. Good shot. Btor=5.93 T. Long EDA H-mode. J-port worked
well at 1.0 MW. Total Prf=1.0-2.0 MW.

Next shot: raise Btor to 6.1 T. (PLC TF limit has to be raised
to 175 kA.)

Shot 27 -- Plasma. Good shot. Btor=6.1 T. One long EDA H-mode. D and J
worked very well. E had some problems. Prf=1.5-2.0 MW. Density
continues to peak throughout the EDA. Thomsom central density
trace looks like it saturated. Dmitri will check it.

Next shot: repeat, no changes.

Shot 28 -- Plasma. Good shot. Btor=6.1 T. One long EDA H-mode. Prf<=2.1 MW.
Density continues to peak throughout the EDA. Dmitri finds that
the Thomson signals are not saturating...the central density is
really climbing for a while and then holding very steady.

Next shot: raise Btor to 6.3 T. This is okay according to the
RF guys.

Shot 29 -- Plasma. Good shot. Btor=6.3 T. J-port faulted out early.
Two EDA H-modes. Prf=1.0+ MW. Early current rise is getting
faster, but no much hard x-rays.

Next shot: repeat, no changes

I have to go give my APS dry run. Jim Irby will take over for the last
two shots (30 and 31).

Shot 30 -- Plasma. Good shot. Btor=6.3 T. RF performance is much better.
Two good EDA H-modes.

Next shot: raise Btor to 6.5 T (RF guys OK'd it).

Shot 31 -- Plasma. Good shot. Btor=6.5 T. Two EDA H-modes. D,E, and J3
transmitters worked very well. Prf=2.0 MW.

End of run

Session Leader Comments
Nov 5 2002 09:19:25:533AM1021105001 Boronization recovery
not a terrible shot.
Nov 5 2002 10:08:53:010AM1021105002 Boronization recovery
nice EDA
some camac problems on K-port spect.
Nov 5 2002 10:09:18:167AM1021105003 fizzle
Nov 5 2002 10:18:52:750AM1021105004 copious Camac concerns
Nov 5 2002 10:54:22:700AM1021105005 continued Camac concerns
Nov 5 2002 10:56:45:233AM1021105006 Nice shot,
still have Camac problems
Nov 5 2002 10:57:00:250AM1021105007 Things are all sorted out.
changing field to 5.1 T for next shot
starting the TF scan
Nov 5 2002 11:16:55:153AM1021105008 TF 5.1 T
some trips on f port spectrometer.
good signal on others.
Nov 5 2002 11:27:53:600AM1021105009 HV lowered to keep them from tripping,
good looking H-mode, some RF trips but good power
Nov 5 2002 11:48:24:087AM1021105010 Very good looking shot,
very good rotation data.
Nov 5 2002 12:05:45:287PM1021105011 TF 4.9 T good data,
very good Statistics

Nov 5 2002 12:09:20:257PM1021105012 TF 4.9 T better data,
very good Statistics
long EDA
Nov 5 2002 12:26:08:943PM1021105013 TF 4.7 T double EDA
F- good data, K- good data,
jr-good data
Nov 5 2002 12:58:40:107PM1021105014 TF 4.7 T double EDA messy though
F- good data, K- good data,
jr-good data
Nov 5 2002 12:59:31:513PM1021105015 TF 4.5 T messy H-mode. ITB late on
Excellent signals
F- good data, K- good data,
jr-good data
Nov 5 2002 01:01:12:563PM1021105015 TF 4.5 T messy H-mode. ITB late on
Excellent signals
F- good data, K- good data,
jr-good data
Nov 5 2002 01:10:34:447PM1021105016 TF 4.5
good signals
very similar to 015
Nov 5 2002 01:28:30:553PM1021105017 TF 4.6 T
three EDA H-modes
good signals
Nov 5 2002 02:00:17:653PM1021105018 TF 4.6 T
good signal
again three H-modes
Nov 5 2002 02:01:38:623PM1021105018 TF 4.6 T
good signal
again three H-modes
Nov 5 2002 02:02:52:110PM1021105019 TF 4.6 T
good signal
again three H-modes
Nov 5 2002 02:15:37:887PM1021105020 TF back to 5.3
h-mode is alittle rough
next will repeat.
Nov 5 2002 02:32:00:507PM1021105021 TF 5.3 T
h-mode, F-spectrometer tripped
Nov 5 2002 02:39:53:200PM1021105022 TF 5.5 T
2 h-modes, RF a little ragged
no trips on spectrometers!
Nov 5 2002 03:01:50:450PM1021105023 TF 5.7 T
rotation signals all seem good.
decent H-mode, RF is not horrible
Nov 5 2002 03:18:27:637PM1021105024 TF 5.9 T
2 H-modes
ragged RF
field reaches 5.9 at 0.6
Nov 5 2002 03:42:15:820PM1021105025 TF 5.9 T again
O.K. shot, not much different
Nov 5 2002 03:46:07:867PM1021105026 TF 5.9 T Again
RF is alittle better,
Spectrometer signals are pretty good.
nice statistics.
Nov 5 2002 04:05:39:060PM1021105027 TF 6.1 T
Some RF trips, but E-port is just not happy
rotation signals look o.k.
Nov 5 2002 04:24:09:623PM1021105028 TF 6.1 T
Some RF trips,
rotation signals look o.k, another strange
shot, not as weird as 027 though
Nov 5 2002 04:46:28:887PM1021105029 TF 6.3 T
Some RF trips,
rotation signals look o.k
Nov 5 2002 04:53:18:940PM1021105030 TF 6.3 T
Some RF trips,
rotation signals look o.k
two H-modes
Nov 5 2002 05:13:21:590PM1021105031 TF 6.5 T
Nice Clean RF!!
rotation signals look o.k
two H-modes

Physics Operator Comments
Nov 5 2002 09:05:56:553AMRobert GranetzEngineering setup for Tuesday, 05 Nov 2002

Boronization recovery, then
MP 325: TF Scan/rotation

Session leader: D. Lee
Physics operator: R. Granetz

ECDC overnight in D2 at 2e-4 Torr, stopping by 07:00.
Bake at 60 C overnight as well, if possible.

Run begins at 09:00 and ends at 17:00.

Power systems the same as on 1021029008 (0.9 MA, 5.4 T, lower single null)

Gas setup:
fill B-Top with 6 psi D2 Hybrid enabled (PG4)
fill B-side lower with 1 psi Ar Hybrid enabled (PG1)
fill B-side upper with 10 psi D2 Hybrid DISABLED (PG2) (for ECDC)
fill C-side with 30 psi D2 Hybrid enabled (PG3)
leave J-Bottom as is Hybrid DISABLED (PG5)

Enable the following gate valves, assuming no vacuum problems:
ECE, VUV, DNB

-------------------------------------------------------------------------------
RF Setup: All 3 transmitters Run On by 08:00.

-------------------------------------------------------------------------------
Run Plan: Investigate peak in rotation profile vs RF resonance location.
Try to get EDA H-modes over a range of Btor's, starting at 5.3 T
and dropping down by 0.2 T every couple of shots until we get to
4.1 T. If there's time, raise Btor as high as 6.3 T. We want EDA's,
so we may have to play with triangularity and density a bit. Puff
argon so the Hireces can get rotation profiles.

Start with shot 1021029008, but adjust Ip to 0.8 MA, Btor to 5.3 T,
and argon puff to go from t=0.35 to 0.39 s.
Nov 5 2002 09:06:22:867AMRobert Granetz The machine was boronized last evening.
ECDC was done overnight, but no bake.

Hybrid coldstart done by the engineering group; no errors found

Loaded PCS from shot 1021029008 (0.9 MA, 5.4 T, single null lower),
but adjusted Ip to 0.8 MA, Btor to 5.3 T, and
programmed in a 40 ms argon pulse starting at t=0.35 s.
Nov 5 2002 09:15:27:093AM1021105001Robert GranetzShot 01 -- Plasma. Good shot. 0.8 MA, 5.3 T, nl_04=1.0-1.2e20 m-2.
E and J each give low power, none from D. No H-modes.
Current rise was a little slow.

Next shot: reduce pre-fill puff by 2 ms.
Nov 5 2002 09:33:37:870AM1021105002Robert GranetzShot 02 -- Plasma. Good shot. Steady EDA H-mode. Got 2.1 MW RF, split
amongst D, E, and J.

Next shot: no changes
Nov 5 2002 09:40:27:893AM1021105003Robert GranetzShot 03 -- Fizzle. Current rise was still a little slow.

Next shot: reduce pre-fill puff another 2 ms.
Nov 5 2002 10:10:48:900AM1021105004Robert GranetzShot 04 -- Plasma. Good shot. Prf=2.0 MW, but there was only a short
H-mode late in the flattop. Current rise was still slow.
Davis tried to fix some camac problems prior to this shot, but
it didn't help.

Next shot: reduce pre-fill another 1 ms.
Nov 5 2002 10:28:56:803AM1021105005Robert GranetzShot 05 -- Plasma. Good shot. Long, steady EDA H-mode. Btor=5.3 T still.
Current rise is still slow, but I'll leave it alone for the next
shot.

Next shot: no changes
Nov 5 2002 10:35:59:793AM1021105006Robert GranetzShot 06 -- Plasma. Good shot. Another nice long EDA H-mode. Prf<=2.3 MW,
shared amongst all three antennas. Btor=5.3 T still. Current
rise is slightly faster.

Next shot: no changes
Nov 5 2002 10:53:54:557AM1021105007Robert GranetzShot 07 -- Plasma. Good shot. Another nice long EDA H-mode. Prf<=2.3 MW.

Next shot: reduce Btor to 5.1 T
Nov 5 2002 11:09:12:337AM1021105008Robert GranetzShot 08 -- Plasma. Good shot. Another nice long EDA H-mode. Btor=5.15 T.
Prf<=2.3 MW.

Next shot: tweak Itf down by another 1 kA. Also increase argon
puff by 10 ms (to 50 ms).
Nov 5 2002 11:20:12:343AM1021105009Robert GranetzShot 09 -- Plasma. Good shot. Another nice long EDA H-mode. Btor=5.1 T.
Prf<=2.3 MW.

Next shot: no changes
Nov 5 2002 11:41:40:110AM1021105010Robert GranetzShot 10 -- Plasma. Good shot. Another nice long EDA H-mode. Btor=5.1 T.
Prf<=2.3 MW.

Next shot: reduce Btor to 4.9 T
Nov 5 2002 12:02:18:703PM1021105011Robert GranetzShot 11 -- Plasma. Good shot. Another nice long EDA H-mode. Btor=4.9 T.
Prf=2.3 MW. Jim Irby points out that the radiated power has
been monotonically increasing from it's very low post-boronization
level at the start of the day.

Next shot: no changes
Nov 5 2002 12:03:55:800PM1021105012Robert GranetzShot 12 -- Plasma. Good shot. Another nice long EDA H-mode. Btor=4.9 T.
Prf=2.3 MW.

Next shot: reduce Btor to 4.7 T
Nov 5 2002 12:25:23:973PM1021105013Robert GranetzShot 13 -- Plasma. Good shot. Two shorter EDA H-modes. Btor=4.66 T.
Prf=2.3 MW.

Next shot: tweak Itf up by 1 kA.
Nov 5 2002 12:40:41:030PM1021105014Robert GranetzShot 14 -- Plasma. Good shot. Two EDA H-modes, not as constant as those
at higher fields. Btor=4.7 T. Prf=2.3 MW.

Next shot: reduce Btor to 4.5 T. Leave shape and density the same
for now.
Nov 5 2002 12:57:24:967PM1021105015Robert GranetzShot 15 -- Plasma. Good shot. Two non-constant H-modes, not sure if they're
still EDA. An ITB forms towards the end of the latter H-mode
period. Prf=2.3 MW. Btor=4.47 T.

Next shot: tweak Itf up by 1 kA, and increase upper triangularity
by reducing RXU by 2 cm.
Nov 5 2002 01:14:38:307PM1021105016Robert GranetzShot 16 -- Plasma. Good shot. Two H-modes, the 2nd one looks like EDA.
Btor=4.5 T. Prf<=2.3 MW. Upper triangularity is 0.42 (It was
0.34 on previous shots.)

Next shot: increase Btor to 4.6 T, and lower triangularity (by
reducing RXL by 1 cm).
Nov 5 2002 01:34:56:950PM1021105017Robert GranetzShot 17 -- Plasma. Good shot. Btor=4.61 T. Three H-modes, not very EDA-like.
Lower triangularity increased to 0.55 (was 0.50 on previous shots).
Prf<=2.3 MW. Outer gap has shrunk a few mm since making the
shape changes.

Next shot: increase outer gap by 4 mm (reduce RCUR by 2 mm).
Nov 5 2002 01:46:11:753PM1021105018Robert GranetzShot 18 -- Plasma. Good shot. Btor=4.6 T. Three H-modes, the last one
is definitely EDA. Outer gap is back to 1.1 cm, which helped
the RF performance a lot. Prf=2.3 MW.

Next shot: no changes
Nov 5 2002 02:00:05:293PM1021105019Robert GranetzShot 19 -- Plasma. Good shot. Btor=4.6 T. Three H-modes, the last one
is definitely EDA. Prf=2.3 MW.

Next shot: go back to Btor=5.35 T by re-loading segment 2 from
shot 07, but keep the argon puff at 50 ms. (Upper and lower
triangularities, and outer gap, will change back from their
current settings.)
Nov 5 2002 02:12:42:057PM1021105020Robert GranetzShot 20 -- Plasma. Good shot. Btor=5.35 T. One long EDA H-mode (again).
RF had some problems. Prf=1.0-2.2 MW. Hard x-rays are starting
to appear; current rise is fast.

Next shot: increase pre-fill by 1 ms.
Nov 5 2002 02:31:32:443PM1021105021Robert GranetzShot 21 -- Plasma. Good shot. Btor=5.35 T. One long EDA H-mode.
RF had some problems again. Prf=1.0-2.2 MW. Current rise is
still somewhat fast; we still have some hard x-rays.

Next shot: Raise Btor to 5.5 T, increase pre-fill another 1 ms.
Also reduce RCUR by 1 mm to increase outer gap and maybe help RF.
Nov 5 2002 02:49:51:457PM1021105022Robert GranetzShot 22 -- Plasma. Good shot. Btor=5.55 T. RF still having problems.
Prf=1.0-2.0 MW. Two good EDA H-modes. Startup is looking
worse for some reason.

Next shot: raise Btor to 5.7 T.
Nov 5 2002 03:51:13:523PM1021105023Robert GranetzShot 23 -- Plasma. Good shot. Btor=5.73 T. One long EDA H-mode. RF power is
still not very clean. Prf=1.1-2.0 MW. Alternator crew reported
hearing noises on that shot. Hard x-rays were slightly reduced.

Next shot: raise Btor to 5.9 T, using a finite rampup, rather than
a sudden jump at segment switch. (PLC TF limit has to be raised
to 170 kA.)
Nov 5 2002 03:15:42:493PM1021105024Robert GranetzShot 24 -- Plasma. Good shot. Btor=5.93 T. RF had lots of problems. Two
short H-modes. No noises reported from alternator.

Next shot: repeat, except ramp up Btor a bit faster.
Nov 5 2002 03:39:36:437PM1021105025Robert GranetzShot 25 -- Plasma. Good shot. Btor=5.92 T. One short EDA H-mode. No noises
reported from alternator. J-port faulted out early. Hard x-rays
are down, even though early current rise is pretty fast. Prf=0.5-
1.0+ MW.

Next shot: repeat, no changes.
Nov 5 2002 03:47:18:713PM1021105026Robert GranetzShot 26 -- Plasma. Good shot. Btor=5.93 T. Long EDA H-mode. J-port worked
well at 1.0 MW. Total Prf=1.0-2.0 MW.

Next shot: raise Btor to 6.1 T. (PLC TF limit has to be raised
to 175 kA.)
Nov 5 2002 04:05:17:243PM1021105027Robert GranetzShot 27 -- Plasma. Good shot. Btor=6.1 T. One long EDA H-mode. D and J
worked very well. E had some problems. Prf=1.5-2.0 MW. Density
continues to peak throughout the EDA. Thomsom central density
trace looks like it saturated. Dmitri will check it.

Next shot: repeat, no changes.
Nov 5 2002 04:16:14:250PM1021105028Robert GranetzShot 28 -- Plasma. Good shot. Btor=6.1 T. One long EDA H-mode. Prf<=2.1 MW.
Density continues to peak throughout the EDA. Dmitri finds that
the Thomson signals are not saturating...the central density is
really climbing for a while and then holding very steady.

Next shot: raise Btor to 6.3 T.
Nov 5 2002 04:22:26:553PM1021105028Robert GranetzShot 28 -- Plasma. Good shot. Btor=6.1 T. One long EDA H-mode. Prf<=2.1 MW.
Density continues to peak throughout the EDA. Dmitri finds that
the Thomson signals are not saturating...the central density is
really climbing for a while and then holding very steady.

Next shot: raise Btor to 6.3 T. This is okay according to the
RF guys.
Nov 5 2002 04:33:27:920PM1021105029Robert GranetzShot 29 -- Plasma. Good shot. Btor=6.3 T. J-port faulted out early.
Two EDA H-modes. Prf=1.0+ MW. Early current rise is getting
faster, but no much hard x-rays.

Next shot: repeat, no changes
Nov 5 2002 05:47:55:843PM1021105030Robert GranetzI have to go give my APS dry run. Jim Irby will take over for the last
two shots (30 and 31).
Nov 5 2002 05:55:58:047PM1021105030Robert GranetzShot 30 -- Plasma. Good shot. Btor=6.3 T. RF performance is much better.
Two good EDA H-modes.

Next shot: raise Btor to 6.5 T (RF guys OK'd it).
Nov 5 2002 05:40:52:323PM1021105031Robert GranetzIrby for Granetz: increased Tf current to 181.45 kA for 6.5 T field
Nov 5 2002 05:56:19:830PM1021105031Robert GranetzShot 31 -- Plasma. Good shot. Btor=6.5 T. Two EDA H-modes. D,E, and J3
transmitters worked very well. Prf=2.0 MW.

End of run

Engineering Operator Comments
ShotTimeTypeStatusComment
109:07:12:163AMPlasmaOk
209:20:52:940AMPlasmaOk
309:35:26:810AMPlasmaOk
410:02:13:970AMPlasmaOk
510:18:12:047AMPlasmaOk
610:31:13:167AMPlasmaOk
710:45:48:973AMPlasmaOk
811:02:05:127AMPlasmaOk
911:15:25:420AMPlasmaOk
1011:29:40:837AMPlasmaOk
1111:44:33:143AMPlasmaOk
1211:59:10:610AMPlasmaOk
1312:16:37:670PMPlasmaOk
1412:31:14:977PMPlasmaOk
1512:45:49:940PMPlasmaOk
1601:01:04:780PMPlasmaOk
1701:18:58:983PMPlasmaOk
1801:36:47:497PMPlasmaOk
1901:50:11:507PMPlasmaOk
2002:04:42:347PMPlasmaOk
2102:18:21:373PMPlasmaOk
2202:33:11:227PMPlasmaOk
2302:51:28:727PMPlasmaOk
2403:09:17:130PMPlasmaOk
2503:22:42:703PMPlasmaOk
2603:37:27:070PMPlasmaOk
2703:52:49:437PMPlasmaOk
2804:08:36:803PMPlasmaOk
2904:26:22:050PMPlasmaOk
3004:41:30:027PMPlasmaOk
3104:58:20:677PMPlasmaOk