Miniproposals

Miniproposal: 612 Date Filed: 7/21/2010 Title: Expanded exploration of LHCD Density Limit First Author: Greg Wallace Session Leader: Greg Wallace (shots 1-31)

Engineering Operator Run Comment

automatically entered by signon - please replace with real comment

Session Leader Plans

Entered: Aug 6 2010 08:38:10:767AM

Author: Greg Wallace

Session leader plan for 1100806 Session Leader: G. Wallace Physics Operator: W. Rowan MP: 612 Exploration of LHCD Density Limit LH Setup: Launcher 0.5 mm behind limiter; 90 degree current-drive phasing; 700+ kW net power; LH on from 0.7 to 1.2s. 1.Complete unfinished density scans from FY08 campaign. Ramped density shot at 5.4 T, 1.1 MA, 110° phasing, PLH = 700 kW, nebar = 0.5-1.1x1020 m-3 (nl04=3-7e19) L-mode. Reference equilibrium 1100729005 (change current to 1100 kA and density ramp---can also use 1100805018 as template). Repeat at 7 T, 800 kA. (2-4 shots) 2.Confirm results from FY08 match results from FY10. 5.4 T, 800 kA, 90° phasing (n|| = 1.9, equivalent to 75° phasing from old launcher), PLH = 700 kW, nebar = 0.7-1.3x1020 m-3 (nl04=4-8e19)L-mode. Reference equilibrium 1100729005 (change current to 800 kA). (1-2 shots) 3.Repeat step 2 in DN, starting from 1091022016. Keep DN consistent during LH pulse. nebar = 0.7-1.2x1020 m-3. (1-2 shots) 4.Repeat step 3 in DN with inner wall fueling. (1-2 shots) 5.Repeat step 2 in limited configuration with CLEARIN set for slightly and highly limited discharges. (2-4 shots) 6.Repeat step 2 with 1 MW of ICRF from J- and/or E-port antennas in L-mode (may require shift to upper null to avoid H-mode). Repeat with 2 MW ICRF. (2-4 shots) 7.Repeat 2 at 800 kA, 4.5 T. (1-2 shots) 8.Repeat 2 at 600 kA, 5.4 T. (1-2 shots) 9.Repeat 2 at 800 kA, 8 T. (1-2 shots)

Physics Operators Plans

Entered: Aug 8 2010 11:54:35:013AM

Author: Bill Rowan

Physop Plan and Engineering setup for 1100806, Friday, August 6, 2010 Purpose: MP 612 - Exploration of LHCD density limit SL: Wallace PO: Rowan ----------------- Engineering Setup ----------------- Run begins at 09:00 and ends at 17:00 Power systems as on: 1100729005 Acoil: +Dtop -Dbot -Jtop +Jbot (standard) Hybrid Enabled Gas setup: Fill B-Top with 6 psi D2 Hybrid enabled (PG4) fill B-side lower with 1 psi Ar Hybrid DISABLED (PG1) leave B-side upper as is Hybrid DISABLED (PG2) fill B-main (C-side) with 40 psi D2 Hybrid enabled (PG3) fill NINJA with 10 psi D2 DISABLED Enable gatevalves and shutters: ECE, VUV, HiREX Sr, Z-bolo, Xeus Torvac gatevalve toggle (yes/no): no Boronization(yes/no): no Overnight ECDC (yes/no): yes ICRF(yes/no): 2 MW later in the day, off for the first shot LH(yes/no): yes Cryopump (yes/no): yes Vessel temperature: 35/35/35 ------------------------------ ECDC Parameters ------------------------------ Gas Setup Gas: D2 Pressure: 2e-4 Torr Sweep: 44/45/103 cm Scan: 20/120 s

Session Leader Summaries

Entered: Aug 13 2010 10:27:28:070AM

Author: Greg Wallace

This run day was in support of MP 612, Exploration of LHCD Density Limit. The goal of the day was to both confirm the data on the density limit taken during the 2008 campaign and examine the role of plasma topology and fueling on the density limit. Ramped density scans were peformed in single and double null, and also in inner wall limited discharges. Single density scans show agreement in non-thermal electron bremsstrahlung from the HXR camera as compared to results from 2008. Preliminary analysis shows a small increase in HXR emissivity at high density in double null as compared to single null. HXR emission appears to decrease like 1/ne in inner wall limited discharges up to line averaged densities of 1.6x10^20 m^-3. Summary of good shots: 7: 5.4T, 800 kA, nebar=-.7-1.3e20, PLH=400kW, n||=1.9 10: good shot, no HXR data 19: 550 kW LH power, n||=1.9, nebar=0.7-1.2e20, close to double null, 800 kA, 5.4 T, possible H-mode at 1.1 s? 21: nebar=0.8-1.1e20 in L-mode, nebar=1.1-1.5e20 in H-mode, 800 kA, 5.4 T, double null 23: ELM-free H-mode, nebar=1.3-2.5e20, 5.4T, 800 kA, 600 kW LH power, double null 25: 600 kW LH power, n||=1.9, nebar=1.0-1.5e20, 5.4 T, 800 kA, double null with inner wall puffing 27: Inner wall limited with some trips but possibly usable data. nebar~1.4e20. 28: Inner wall limited, nebar=1.3-1.5e20, PLH=600 kW, n||=1.9 29: nebar=0.7-1.15e20, inner wall limited, PLH=600 kW, bad HXR data 30: Trophy shot! nebar=1.3-1.5e20, inner wall limited, PLH=600 kW, 5.4T, 800 kA, n||=1.9

Physics Operator Summaries

Entered: Aug 8 2010 01:44:25:140PM

Author: Bill Rowan

We ran three configurations today with cryo pump for all. They consisted of LSN (001-010) and DN (011-025) which was converted to innerwall limited (026-031) via simple gap control. The run started with a LSN. This was loaded from 1100805018, a non-cryo shot. Segment 1 was imported from 1100805013 which was the last cryo shot from that run. The double null part of the run started on shot 011. It was loaded from 1100729023. That shot was not attempted during 1100729 because of a series of engineering failues. In turn, it was loaded from 1091022016 and the wire programming updates were applied when it was loaded for 1100729023. During the current run, the shot was modified to provide a more consistent DN that started at an earlier time by fiddling only with zcur. There was an attempt to do inner wall fueling on a few DN discharges (022 - 025) using the Ninja. The inner wall limited discharge (026-031) was made by changing the gaps using clearin and rcur. The first attempt at this configuration (026) was not successful because the clearin changes did not appear in the final pcs programming for the shot although they were entered in the usual way. The second attempt (027) was successful using the same clearin programming as for the first attempt. The engineering failures consisted of the mysterious TF "failure to run" 1100806005 and a commutation fault on the last shot 1100806031 (attempted after 5 pm) which ended the run. On several shots (012 was one) there were alternator bearing vibration warnings. Alternator was contacted in each case. They approved continuing the run. Scorecard 02 fizzle 013,018 03 dud 015,016,017 23 plasma 001,002,003,004,006,007,008,009,010,011,012,014, 019,021,022,023,024,025,026,027,028,029,030 01 shutdown due to runaways 020 02 engineering failures 005,031 ---------- 31 total

Session Leader Comments
Aug 6 2010 09:28:10:997AM	1100806001	Greg Wallace	All trips on LH. Refco on klystron 4 very high. Will try going to 80 kW/klystron at 40 kV on next shot with klystron 4 into dummy load. Will also move launcher in to 0.1mm behind limiter. Full length plasma at 1.0MA, 5.4 T. Will try to get density ramp and 1.1MA on next shot.
Aug 6 2010 09:49:31:387AM	1100806002	Greg Wallace	All trips again. Will try 90 deg phasing, all klystrons @40kV 80 kW/klystron into plasma on next shot.
Aug 6 2010 10:12:11:840AM	1100806003	Greg Wallace	Better after some initial trips at 90 deg. Locked mode disruption at 1.2s. Will retry with slightly higher density on next shot.
Aug 6 2010 10:27:18:860AM	1100806004	Greg Wallace	LH ran clean but locked mode disrupted at 1.18s. Will be interesting to see what x-rays look like during locked-mode density scan at 1.1MA. Next shot will move on to step 2 from run plan (5.4 T, 800 kA, nl04=4-8e19).
Aug 6 2010 10:36:08:570AM	1100806005	Greg Wallace	No TF==>no plasma!
Aug 6 2010 10:55:19:017AM	1100806006	Greg Wallace	Disruption at .75 s. LH ran until disruption. Next shot will go back to starting point from 1100805018 and switch to 800 kA.
Aug 6 2010 11:14:41:680AM	1100806007	Greg Wallace	Good shot! 5.4 T, nebar = .7-1.3e20, 800 kA. Plh=400 kW, 90 deg. Will try to increase power on next shot (140 kW/klystron, 90 deg)
Aug 6 2010 11:23:13:323AM	1100806008	Greg Wallace	Disruption at .75 s. Nate says increase in W concentration may have caused disruption. Will increase outer gap for next shot but keep all else constant.
Aug 6 2010 11:41:26:797AM	1100806009	Greg Wallace	LH ran clean early, then lots of flashes on grill. Two substantial hot spots on C row, looks like 16/dummy and 15/14 septa. Looks like launcher moved in a little bit too much (1269 counts on PLC, which should be exactly flush). Will move launcher back a little to approximately 0.25mm for next shot and repeat.
Aug 6 2010 11:59:41:613AM	1100806010	Greg Wallace	Good shot! 600 kW net, 90 deg phasing, nebar=.8-1.2e20 (nl04=5-7e19) during LH. Moving on to double null from step 3 of run plan.
Aug 6 2010 12:32:11:490PM	1100806011	Greg Wallace	LH ran clean until disruption at 0.86 s. Didn't really look DN to me. Will repeat.
Aug 6 2010 12:40:51:657PM	1100806012	Greg Wallace	Several trips during LH pulse corresponding to flashes on LH camera. Will retry on next shot with reprogrammed zcur to get more consistent DN.
Aug 6 2010 12:42:05:243PM	1100806013	Greg Wallace	Fizzle.
Aug 9 2010 09:51:15:177AM	1100806014	Greg Wallace	Disruption at .96s. Some flashing on LH starting at .9s. Will try reducing LH power to 120 kW/klystron (still at 90 deg) for next shot to see if that reduces W source. Bill will continue to fiddle with zcur to get better double null.
Aug 6 2010 01:11:20:317PM	1100806015	Greg Wallace	Fizzle.
Aug 6 2010 01:24:32:260PM	1100806016	Greg Wallace	Fizzle.
Aug 6 2010 01:36:57:260PM	1100806017	Greg Wallace	Dud.
Aug 6 2010 01:59:51:517PM	1100806018	Greg Wallace	Fizzle.
Aug 6 2010 02:12:26:867PM	1100806019	Greg Wallace	Good shot! Clean LH shot at 550 kW (120kW/klystron) and 90 deg phasing. nebar=.7-1.4e20 Not quite double null until end of LH pulse. Will try again for something with earlier double null, increase LH to 130 kW/klystron.
Aug 6 2010 02:28:17:197PM	1100806020	Greg Wallace	Lots of early x-rays. Plasma ramped down at 0.5 s. Will try to repeat.
Aug 6 2010 02:43:46:060PM	1100806021	Greg Wallace	Good shot! 2 trips late during LH with associated flashing on LH camera. BIG jump in density on LH probes during end of LH pulse. nebar=0.8-1.4e20, Plh=600 kW, . Moving on to inner wall fueling with 10psi NINJA puff at 0.7 and 1.0 s.
Aug 9 2010 10:00:43:373AM	1100806022	Greg Wallace	First attempt at double null with inner wall fueling. LH ran clean for most of LH pulse, then had some trips associated with flashing on the camera. NINJA puff was not quite enough (if it made it to the plasma). Increasing plenum pressure from 10psi to 20psi for next shot.
Aug 6 2010 03:11:00:593PM	1100806023	Greg Wallace	Good shot! Went into ELM-free H-mode although unintentionally. A few LH trips associated with flashing on camera but no signs of damage to launcher. Will try again with some argon puffing to see if we can keep out of H-mode.
Aug 6 2010 03:22:50:133PM	1100806024	Greg Wallace	Lots of LH trips and flashing later in the shot when density on LH probes is very high. Will try reducing density at beginning of pulse and also pulling launcher back for next shot. Will stay with double null and inner wall puff.
Aug 6 2010 03:41:54:017PM	1100806025	Greg Wallace	Good shot! A little under 600 kW net, 130 kW/klystron at 90 deg. nebar=0.9-1.4e20. Moving on to inner wall limited discharge with density ramp.
Aug 6 2010 04:02:15:133PM	1100806026	Greg Wallace	Disruption at .75 s trying for inner wall limited plasma. Wasn't inner wall limited and density was too high (nl04~6e19) at 0.7s. Will try again for inner wall limited plasma.
Aug 6 2010 04:17:26:227PM	1100806027	Greg Wallace	OK shot. Several trips with associated flashes. Got a nice limited plasma but started at pretty high density (nebar=1.15e20). Will try again for lower starting density. Strange noise on HXR on this shot.
Aug 6 2010 04:25:47:443PM	1100806028	Greg Wallace	Less flashing on grill, but still did not get density as low as we wanted. Will try one more time for lower density during beginning of LH pulse with inner wall limited plasma.
Aug 6 2010 04:45:24:563PM	1100806029	Greg Wallace	Good shot! Early LH shows some strange ECE behavior and bad HXR data. Recovers around .9 s. Will try again with larger outer gap from .9 to 1.2s.
Aug 6 2010 04:55:37:097PM	1100806030	Greg Wallace	Good shot! LH ran clean all the way through. Got small density scan from nebar=1.13-1.3e20. Will try this shot one last time to get full density ramp.
Aug 6 2010 05:07:01:503PM	1100806031	Greg Wallace	Power supply commutationi failure. Disruption at .4s.

Physics Operator Comments
Aug 6 2010 08:33:17:043AM		Bill Rowan	Loaded 1100729005 Imported segment 1 from shot 1100805018 after consultation with SL Note prefill is 57 ms ne_ramp to reproduce is nl_04 = 0.3@0.6s to 0.7@1.5S Loaded wire 14 segment 2 from 1100729005 which should be just that starting TF 5.4 T with 150000 A and limit 165 TF required later in the day 7.0 T with 194000 A, change limit to 200
Aug 6 2010 09:28:30:843AM	1100806001	Bill Rowan	001. Plasma full length nl_04 scan is not as programmed programming started at a very low nl_04 that is not achieved then it jumps quickly to the programmed value ip is 1.0 next shot ip = 1.1 MA
Aug 6 2010 09:43:50:120AM	1100806002	Bill Rowan	002. plasma full length IP = 1.1 MA nl_04 = 0.6 @ 0.6 s nl_04 = 0.7 @ 1.25s density better controlled Next shot. reduced PG3 by about 10% to ck effect on early density
Aug 6 2010 10:03:49:493AM	1100806003	Bill Rowan	003. disruption at 1.2 s Probably a locked mode nl_04 dropped to 0.3 Next shot. Returned PG3 to value on shot loaded. nl_04 ramp reprogrammed to go from 0.4 to 0.8
Aug 6 2010 10:26:20:043AM	1100806004	Bill Rowan	004. disrupted at 1.2 s Next shot load from 1100729005 import segment 1 from 1100806004 increase ip to 800 kA nl_04 scan from 0.4 to 0.8 as originally programmed
Aug 6 2010 10:36:50:833AM	1100806005	Bill Rowan	005. No TF Next shot No PCS changes
Aug 6 2010 10:53:23:690AM	1100806006	Bill Rowan	006. Disruption at 0.75s Next shot Reload shot 1100806004 That shot was working at least. Reduce the current to 800 ka
Aug 6 2010 11:07:33:313AM	1100806007	Bill Rowan	007. Plasma full length IP=0.8 MA nl_04 ramps more or less as expected. Next shot. No PCS changes
Aug 6 2010 11:24:12:120AM	1100806008	Bill Rowan	008. Plasma disruption at 0.75 s Next shot Increase the outer gap by approx 0.5 cm
Aug 6 2010 12:04:35:420PM	1100806010	Bill Rowan	010. Plasma full length, disruption during ramp down Not much effect on the right gap Next shot. Reload 1100729023 This shot was loaded from 1091022016 but never run because of a series of machine problems. Import seg 1 from 1100806010
Aug 6 2010 12:20:48:357PM	1100806011	Bill Rowan	011. Plasma. Disruption at 0.83 s Next shot No pcs changes
Aug 6 2010 12:39:58:050PM	1100806012	Bill Rowan	012 plasma full length, disruption during ramp down getting alternator bearing vibration warnings alternator folk say they are watching it and it is below trip level Next shot raised zcur by 1 mm to improve dn
Aug 6 2010 12:45:02:163PM	1100806013	Bill Rowan	013. fizzle Next shot. reduce prefill by 2 ms
Aug 6 2010 01:21:12:367PM	1100806015	Bill Rowan	015.Fizzle Assume that was a cryo problem Next shot. No pcs changes
Aug 6 2010 01:32:50:210PM	1100806016	Bill Rowan	016.Fizzle Pressure gauge is not working. Makes fizzle correction more difficult Next shot. Reloaded segment 1 from 1100806012 removed 2 ms from the prefill to make to 55 ms
Aug 6 2010 01:39:01:590PM	1100806017	Bill Rowan	017 dud next shot. prefill increased to 59 ms
Aug 6 2010 01:56:20:040PM	1100806018	Bill Rowan	018.fizzle Next shot prefill increased to 61 ms ef4 changed from -1260 to -1280
Aug 6 2010 02:10:29:790PM	1100806019	Bill Rowan	019. Plasma full length. Miracles happen. Next shot. changed zcur to produce the double null around 0.7 s increased prefill from 61 ms to 62 ms
Aug 6 2010 02:37:02:557PM	1100806021	Bill Rowan	021 Plasma full length. Next shot increased prefill from 63 ms to 64 ms increased zcurr by 2 mm
Aug 6 2010 03:01:49:553PM	1100806023	Bill Rowan	023 plasma full length Next shot increased prefill from 65 ms to 66 ms
Aug 6 2010 03:23:17:460PM	1100806024	Bill Rowan	024. plasma full length Next shot increase prefill from 66 ms to 67 ms decrease pg3 reduce nl_04 by 0.1 increase Ar puff to 100 ms at request of SL
Aug 6 2010 03:45:01:783PM	1100806025	Bill Rowan	025. plasma full length Next shot decrease prefill from 67 ms to 65 ms try for "slightly" inner wall limited clearin reduced by 2 cm rcur reduced by 1 cm replace the ramp in nl_04 by reloading wire 14 from shot 021
Aug 6 2010 03:57:58:413PM	1100806026	Bill Rowan	026. plasma disruption at 0.76 s change to clearin did not work for some reason That means that the odd right gap makes sense next shot. Correct clearin
Aug 6 2010 04:14:41:520PM	1100806027	Bill Rowan	027. Plasma full length. Inner wall limited nl_04 too high Next shot. No pcs changes
Aug 6 2010 04:22:56:200PM	1100806028	Bill Rowan	028. Plasma full length nl_04 too high Next shot reduce pre-ramp nl_04 demand from 0.4 to 0.3
Aug 6 2010 04:44:55:857PM	1100806029	Bill Rowan	029 Plasma full length nl_04 as requested Next shot increased outer gap by 0.5 cm between 0.9 and 1.2
Aug 6 2010 04:54:40:927PM	1100806030	Bill Rowan	030 Plasma full length nl_04 high again as for shot 028 Next shot No pcs changes
Aug 6 2010 05:07:16:580PM	1100806031	Bill Rowan	031 early disruption commutation fault must now check fuses on OH cabinet Last shot

Engineering Operator Comments
Shot	Time	Type	Status	Comment
1	09:16:11:647AM	Plasma	Ok
2	09:32:03:410AM	Plasma	Ok
3	09:51:17:087AM	Plasma	Ok
4	10:12:09:010AM	Plasma	Ok
5	10:33:36:043AM	Plasma	Bad	TF did not turn on
6	10:47:02:797AM	Plasma	Ok
7	11:00:16:753AM	Plasma	Ok
8	11:15:07:170AM	Plasma	Ok
9	11:30:05:807AM	Plasma	Ok
10	11:47:05:680AM	Plasma	Ok
11	12:09:09:500PM	Plasma	Ok
12	12:23:08:167PM	Plasma	Ok
13	12:39:23:340PM	Plasma	Ok
14	12:52:33:317PM	Plasma	Ok
15	01:07:18:230PM	Plasma	Ok
16	01:20:46:720PM	Plasma	Ok
17	01:34:35:780PM	Plasma	Ok
18	01:47:37:020PM	Plasma	Ok
19	02:00:42:550PM	Plasma	Ok
20	02:15:26:373PM	Plasma	Ok
21	02:28:54:417PM	Plasma	Ok
22	02:43:28:997PM	Plasma	Ok
23	02:56:28:900PM	Plasma	Ok
24	03:10:33:733PM	Plasma	Ok
25	03:26:09:993PM	Plasma	Ok
26	03:44:52:067PM	Plasma	Ok
27	04:02:23:827PM	Plasma	Ok
28	04:17:13:827PM	Plasma	Ok
29	04:32:17:543PM	Plasma	Ok
30	04:46:54:197PM	Plasma	Ok
31	05:03:42:933PM	Plasma	Ok

System Availability

Aug 6 2010 09:15:54:940AM

System Available Comment Availability Changed Owner Description Who Can Change Active MHD no secured - tagged out Jun 02 2008 11:03AM (sears) Joe Snipes Active MHD Antenna sears,snipes BES no BES system is ready for Up-to-air (Apr, 2010) Mar 31 2010 10:36AM (bespam) Bill Rowan Beam Emission Spectroscopy bespam,liao,rowan Bolometers yes 2pi (D+F) working. All midplane and off-midplane diode arrays working except WB1AX. Midplane foils calibrated and PRAD_MAIN is being filled. Divertor/Ledge foils not yet ready. Jul 15 2010 08:27AM (mlreinke) Matt Reinke Bolometers hutch,mlreinke Boronization no 3/26/10 Bottle Removed From Cell, monitors powered down, Autodialer function bypassed Mar 26 2010 05:29PM (dekow) Jim Irby Boronization dekow,irby CNPA no Single channel CNPA available as of 12/1707 Jun 10 2009 10:22AM (twf) Ron Parker Compact Neutral Analyzer parker Cryopump - Upper Divertor no Shut down. Helium dewar removed. LN2 manual valve and solenoid valves are closed and tagged. Apr 06 2010 10:51AM (labombard) Brian LaBombard Upper Divertor Cryopump irby,labombard CXRS no Wide-view CXRS system is power down and ready for up-to-air (Apr, 2010) Mar 31 2010 10:36AM (bespam) Bill Rowan Charge Exchange Spectroscopy bespam,blip,liao,rachmcd,rowan D Alpha yes \ha2_bright is available; \SPECTROSCOPY::TOP.VUV.VIS_SIGNALS:MCP_VIS_SIG1 is not available Jul 01 2009 09:45AM (terry) Jim Terry Balmer Alpha Monitor irby,terry,wolfe Dalsa yes system is aligned; new calibrations (relative brightness and position) not yet implemented Jun 29 2010 10:27AM (marmar) Earl Marmar Visible Bremsstrahlung marmar Disruption Mitigation yes operational, but turned off Nov 03 2009 04:59PM (granetz) Robert Granetz Gas Jet granetz,whyte Divertor IR no   Mar 06 2007 10:50AM  Glen Wurden Divertor IR Digital Video gwurden,terry Divertor IR Spectroscopy no   Mar 06 2007 10:51AM  Glen Wurden Divertor IR Spectroscopy gwurden,terry DNB no in test mode only Nov 03 2009 05:01PM (granetz) Robert Granetz Diagnostic Neutral Beam dterry,granetz,gung ECDC yes Operational Jun 26 2010 09:28PM (irby) Jim Irby 2.45 GHz, 3 kW, discharge cleaning system dekow,irby,pfeiffer FRC-ECE yes All channels working and calibrated. Jul 30 2010 08:13AM (phillips) Perry Phillips Heterodyne ECE-32 channels phillips G-Side Ratiomatic yes Gauges are operational. Jun 28 2010 08:02PM (labombard) Brian LaBombard G-side ratiomatic ionization gauge labombard,toland Glow Discharge no Plugs for Power Supply and Controls have been unplugged and red tagged making system safe for In-Vessel Access. Apr 05 2010 11:18AM (dekow) Jim Irby 1 kV, 5 A, glow discharge system dekow,dterry,irby GPC yes Operational. Jul 28 2009 04:23PM (hubbard) Amanda Hubbard ECE Polychromater hubbard,schmidt GPC2 yes Most channels operational. Ch 5 preamp replaced 6/18. Jun 22 2010 03:03PM (hubbard) Amanda Hubbard ECE Polychromater hubbard,schmidt GPI yes The Xpt-view, the midplane-view cameras are operational. The innerwall GPI (coupled to the fast-diodes) is available. Jul 01 2009 09:45AM (terry) Jim Terry Gas Puff Imaging terry,zweben H/D yes operating normally Jun 29 2010 10:26AM (marmar) Earl Marmar H/D Ratio marmar HEAT yes   Jun 26 2010 11:19PM (dekow) Gary Dekow - Machine Heaters - burke,dekow Hirex Jr yes Hirex-Jr has been installed Jun 28 2010 03:36PM (rice) John Rice High Resolution X-Ray ince,rice Hirex Sr yes System installed and aligned. Inverted profiles are still not available. Jul 22 2010 08:41AM (ypodpaly) John Rice High Resolution X-Ray ince,rice,ypodpaly HXR yes   Jun 28 2010 12:12PM (schmidt) Ron Parker Hard X-Ray Array parker,schmidt ICRF D-Antenna yes system checked out ok on 11006728. Jun 28 2010 04:57PM (ylin) Steve Wukitch D-port antenna wukitch,ylin ICRF E-Antenna yes system checked out ok on 1100628 Jun 28 2010 04:57PM (ylin) Steve Wukitch E-port antenna wukitch,ylin ICRF J-Antenna yes system checked out ok. conditioned to vacuum. Jun 28 2010 04:58PM (ylin) Steve Wukitch J-port antenna wukitch,ylin Laser Blow-Off yes operational and tested Jul 20 2010 04:42PM (g) Martin Greenwald Impurity Injection System g,nthoward Lower Hybrid yes LH was tested into dummy loads synced to shot. Shorts have been removed. Probe Cal. 6/29/10 evening. Jun 29 2010 03:51PM (dterry) Ron Parker Lower Hybrid dterry,parker,wallaceg Lower Hybrid Reflectometer yes 60 GHz system to detect upshifted signal Jul 28 2010 01:39PM (sgbaek) Arturo Dominguez Lower Hybrid Reflectometer dominguez,marmar,parker,sgbaek LPI no Beam line removed May 30 2008 02:09PM (bose) Earl Marmar Lithium Pellet Injector bose,marmar Ly-alpha yes LYMID, WB4LY and LLY working. WB1LY not attached due to pickup problems. Jul 01 2010 11:58AM (mlreinke) Matt Reinke Lyman alpha cameras labombard,mlreinke McPherson yes Spectra being collected and tree filled. Wavelength scan is broken so fixed on the Mo XXXI and XXXII lines. Jul 15 2010 08:28AM (mlreinke) Jim Terry VUV Spectrometer mlreinke,terry Michelson yes Operational. Start at reduced speed. Jun 22 2010 03:02PM (hubbard) Amanda Hubbard ECE Te Profiles hubbard,schmidt MKS yes Gauges are operational Jun 28 2010 08:02PM (labombard) Brian LaBombard Baratron pressure gauges labombard MLP no System is in edge lab. Version 2 drivers ready to test. Needs a student to help work on it. Jul 14 2009 09:20PM (labombard) Brian LaBombard Mirror Langmuir Probe Electronics System labombard MSE no As of 6/10/09, MSE is calibrated & ready to go. Awaiting DNB. Jun 10 2009 10:34AM (sscott) Steve Scott Motional Stark Effect jinseok,sscott Neutrons yes All systems are on and functional Jun 29 2010 12:56PM (fiore) Catherine Fiore Neutron Detectors fiore Neuts and Hards yes PMT Neuts_hards, ssd_x01, ssd_x02, ssd_x03 Jun 26 2010 09:21PM (irby) Jim Irby X-Ray/Neutron Detectors at K-Hor irby NINJA no Capillaries tested in-vessel. Jun 28 2010 08:08PM (labombard) Brian LaBombard NINJA gas puff labombard,terry PCI yes Operational. AM (2 * 39.51) MHz. Jul 19 2010 05:54PM (ntsujii) Miklos Porkolab Phase Contrast Imaging arai,ennever,ntsujii,porkolab Penning Gauges no High voltage power supplies are turned off, waiting for work at A-port horizontal to be finished. Jun 28 2010 08:07PM (labombard) Brian LaBombard Penning Ionization Gauges labombard Plasma TV yes WIDE1, WIDE2 (chan 33), DANT, JANT and DIV are operational. Jul 01 2009 09:46AM (terry) Jim Terry Video of plasma via several cameras dekow,irby,terry,wolfe Polarimeter no Safe for Machine Entry Sep 14 2007 12:17PM (irby) Jim Irby C-Mod Polarimeter irby Power - Alternator Air Switch yes   Jun 26 2010 11:19PM (dekow) Gary Dekow feeds all the other supplies cochran,dekow,dterry,irby Power - PEI yes   Jun 26 2010 11:19PM (dekow) Gary Dekow PEI System cochran,dekow,dterry,irby Power - TMX yes   Jun 26 2010 11:19PM (dekow) Gary Dekow Ef2s,. EFCs and A-Coils byford,cochran,dekow,dterry,irby Power Systems yes   Jun 26 2010 11:20PM (dekow) Jim Irby C-Mod Magnet Supplies byford,cochran,dekow,dterry,irby Probe Array - ISD yes Operational. Jun 28 2010 08:03PM (labombard) Brian Labombard Inner Lower Divertor Probe Array labombard Probe Array - LH yes Operational. Jun 28 2010 08:03PM (labombard) Brian LaBombard Lower Hybrid Probe Array labombard Probe Array - OSD yes F and J outer divertor probes are operational. Jun 28 2010 08:04PM (labombard) Brian LaBombard Outer Lower Divertor Probe Array labombard Probe Array - UDIV yes Operational, except probe#13 Jun 28 2010 08:04PM (labombard) Brian LaBombard Upper Divertor Probe Array labombard Reflectometer yes On 1100803xxx 60-140 channels are all connected. The 50I/Q are being used by the 75GHz channel in order to track down a noise issue. Aug 03 2010 09:31AM (dominguez) Earl Marmar Reflectometer dominguez,marmar Scanning Probe - ASP yes Operational. New Langmuir-Mach probe head installed. Jun 28 2010 08:05PM (labombard) Brian LaBombard A-Port Scanning Probe labombard Scanning Probe - FSP yes Operational. Jun 28 2010 08:05PM (labombard) Brian LaBombard F-Port Scanning Probe labombard Scanning Probe - WASP yes Both A and K units are operational. Coil polarity needs to be checked. Jun 28 2010 08:06PM (labombard) Brian LaBombard Inner Wall Scanning Probe labombard,nsmick Sparker yes HV supply on, cable run to sparker at k-hor Jun 23 2010 02:41PM (irby) Jim Irby Field Emission Preionization for C-Mod dekow,irby,parkin Surface Science Station no SSS installed and leak tested, individual probes not installed Jun 28 2010 01:28PM (ochoukov) Bruce Lipschultz Radially scanning probe located on K-port blip,ochoukov TCI yes No new CO2 detector, so still missing edge channels Jun 23 2010 02:40PM (irby) Jim Irby Two-Color Interferometer irby,murray TS - Core yes Operating with 2 lasers, but density is **uncalibrated** Jul 14 2010 11:54AM (jwhughes) Jerry Hughes Core Thomson scattering jwhughes,yma TS - Edge yes Operational Jul 14 2010 11:54AM (jwhughes) Jerry Hughes Millimeter resolution edge Thomson scattering jwhughes,yma Vispec no 350 and 670 nm, 4 spatial channels Nov 28 2007 09:58AM (agraf) Alex Graf Visible Spectrometer agraf XEUS yes Operational Jul 01 2010 11:57AM (mlreinke) Matt Reinke X-ray Extended Ultraviolet Spectrometer mlreinke XTOMO yes Core system working. Edge system waiting for H-modes. Jul 01 2010 11:55AM (mlreinke) Bob Granetz X-Ray Tomography granetz,mlreinke