Miniproposals

Miniproposal: 702 Date Filed: 5/16/2012 Title: Cold pulse modulation experiments for the study of non-local heat transport and correlation with rot First Author: Chi Gao Session Leader: Chi Gao (shots 1-8)

Engineering Operator Run Comment

MP 702(first part,half run day): Cold pulse modulation experiments

Session Leader Plans

Entered: Jun 4 2012 02:52:21:113PM

Author: Chi Gao

MP 702(first part,half run day): Cold pulse modulation experiments SL: cgao PO: irby This half run day is first part of MP 702. First of all we will try locked mode shot for HiReX velocity calibration (ref: 1120502009). If locked mode is archived, we will move on to have shots with current and density scans with CaF2 injection from 0.5 - 1.5s, 10Hz. put 1.5 psi Ar in B-SIDE-LOWER Target plasma: LSN nl04: varies under different current (see below for details) Ip = 0.55MA, 0.8MA, 1.1MA Bt = 5.4 T ================ Shot Plan =============================================== (1) Locked mode : 1120502009 densities below are approximate. (2) Ip = 0.8MA --(a) nl04 = 0.36 (ne_ave = 0.6). Ref: 1120106020 --(b) nl04 = 0.42 (ne_ave = 0.7). Ref: 1120106017 --(c) nl04 = 0.48 (ne_ave = 0.8) --(d) nl04 = 0.54 (ne_ave = 0.9) --(e) nl04 = 0.60 (ne_ave = 1.0). Ref: 1120106015 (3) Ip = 0.55MA --(a) nl04 = 0.24 (ne_ave = 0.4). Ref: 1120216022 --(b) nl04 = 0.30 (ne_ave = 0.5). Ref: 1120216023 --(c) nl04 = 0.36 (ne_ave = 0.6) --(d) nl04 = 0.42 (ne_ave = 0.7) --(e) nl04 = 0.48 (ne_ave = 0.8). Ref: 1120216019 (4) Ip = 1.1MA --(a) nl04 = 0.54 (ne_ave = 0.9). Ref: 1120216009 --(b) nl04 = 0.66 (ne_ave = 1.1). Ref: ~1120216011 (ne_ave = 1.2) --(c) nl04 = 0.78 (ne_ave = 1.3). Ref: ~1120216012 (ne_ave = 1.4) --(d) nl04 = 0.90 (ne_ave = 1.5). Ref: 1120216013 --(e) nl04 = 1.02 (ne_ave = 1.7). Ref: ~1120216014 (ne_ave = 1.75) --(f) nl04 = 1.14 (ne_ave = 1.9) (5) Locked mode. If there are fizzle or disruptions, we might need to drop some shots of low priority: (3) (a)(e) (4) (a)(f) ================ Required Diagnostics ================================== HiReX-Sr, HiReX-Jr, CXRS, PCI, GPI, FRCECE, GPC, GPC2, core and edge Thomson, reflectormeter, TCI, XEUS/LoWEUS

Entered: Jun 5 2012 05:58:02:070PM

Author: Jim Irby

2nd half of run MP676 and MP677 -------- Polarimeter Noise Level Tests This run will quantify the polarimeter noise levels and possibly improve them before tomorrow's run with LH. Startup from 1120601027 from last Friday's LH conditioning run 3-5 discharges to check on reproducibility --- Ip toggle late in discharge 2-3 discharges --- change TF start time and observe changes in polar noise level 2-3 discharges --- put in Ip ramp starting at 700 ms --- vary amplitude

Physics Operators Plans

Entered: Jun 5 2012 07:17:08:183AM

Author: Jim Irby

----------------- Engineering Setup ----------------- Run begins at 09:00 and ends at 17:00 Power systems as on: Acoil: +Dtop -Dbot -Jtop +Jbot (standard) Hybrid Enabled Gas setup: Fill B-Top with 6 psi D2 Hybrid enabled (PG4) fill B-side lower with 1.5 psi Ar Hybrid DISABLED (PG1) leave B-side upper as is Hybrid DISABLED (PG2) fill B-main (C-side) with 40 psi D2 Hybrid enabled (PG3) fill H-Bottom with 6 psi He4 DISABLED (PG5) fill NINJA with 10 psi D2 DISABLED Enable gate-valves and shutters: ECE, VUV, HiREX Sr, Xeus/LoWEUS Leave z-bolo shutter as is (should be open) Torvac gatevalve toggle (yes/no): no Boronization(yes/no): no Overnight ECDC (yes/no): YES ICRF(yes/no): no LH(yes/no): no Cryopump (yes/no): no DNB (yes/no): YES Vessel temperature: 35/35/35 ------------------------------ ECDC Parameters (if requested) ------------------------------ gas and pressure: D2 at 2e-4 Torr sweep: 44/45/103 cm scan: 20/120 s

Session Leader Summaries

Entered: Jun 5 2012 02:37:43:500PM

Author: Chi Gao

SL_SUMMARY for the first half run: MP702 We tried 8 shots. 2 full-length shots (002,003) 1 shot no power (001) 1 early disruption (006) 4 fizzles (004,005,007,008) Shot 2 is locked mode for hirex-sr caliration. Shot 3 we got non-local effect on the temperature at low density (nl04~0.32) and low current (0.55MA). After shot 8, there was connecting problem for HiReX. Also the time was limiting and CaF2 slide might not be able to last as many shots as we need, we decided to turn over the left of the run to MP 676/677. Hopefully we can get another half run day.

Entered: Jun 5 2012 05:57:20:937PM

Author: Jim Irby

part 2 --- shots 09 to 25 --- Investigate Polarimeter Signal-to-Noise Level with LH plasma parameters We hoped to use this half day to produce plasmas similar to ones that are useful for lower hybrid current drive experiments, and to see what we could do to improve the polarimeter signal-to-noise. We began by loading 1120601027 from last Friday in which the LH performed well. Several discharges were produced w/o changing any plasma parameters to assess the shot-to-shot variation in the polar signals. On shot 17 I added a jog in the current at the 50 kA level. We were able to see the jog on the polar signals, but it was really close to the noise/vibrational level. On shot 18 we increased the TF from 5.44 to 6 T and found very little change in signal-to-noise or timing of the vibrations. On shot 20 we changed the TF start time from -1 to -1.1 s. This change actually improved the vibration levels around t=0, and should make determination of the polar baselines easier. We took a few shots at the end of the run at higher density and current to be able to compare with earlier data. We also added a 300 kA down ramp from 800 kA while keeping the density fairly constant. Not too surpised to see this change very clearly on the polarimeter.

Physics Operator Summaries

Entered: Jun 5 2012 05:54:25:220PM

Author: Jim Irby

part 1 --- shots 01 to 08 ---- Cold Pulse We had many problems during part 1 of this run day. We had several issues with the data system, some of which were caused by the failure of a data switch overnight. It was replaced during the night, but not all servers were rebooted. So we had to both reboot the servers and restart the Cycle. Figuring this problem out took a few shots. We also had claims of ACK and IGOR failures, possibly related to the first problem. We also had the recurrence of a problem with the OH2 supplies not following their programming from the start (-1.1 s). The currents were off by several hundred Amps by t=0. So we had several fizzles until that issue was resolved (reset afols). The first plasma shot today was a locked mode discharge. It ran properly, but the argon level was not high enough for a good calibration. part 2 --- shots 09 to 25 --- Investigate Polarimeter Signal-to-Noise Level with LH plasma parameters We hoped to use this half day to produce plasmas similar to ones that are useful for lower hybrid current drive experiments, and to see what we could do to improve the polarimeter signal-to-noise. We began by loading 1120601027 from last Friday in which the LH performed well. Several discharges were produced w/o changing any plasma parameters to assess the shot-to-shot variation in the polar signals. On shot 17 I added a jog in the current at the 50 kA level. We were able to see the jog on the polar signals, but it was really close to the noise/vibrational level. On shot 18 we increased the TF from 5.44 to 6 T and found very little change in signal-to-noise or timing of the vibrations. On shot 20 we changed the TF start time from -1 to -1.1 s. This change actually improved the vibration levels around t=0, and should make determination of the polar baselines easier. We took a few shots at the end of the run at higher density and current to be able to compare with earlier data. We also added a 300 kA down ramp from 800 kA while keeping the density fairly constant. Not too surpised to see this change very clearly on the polarimeter. We had no fizzles during part 2 of the run, but had two disruptions, both related to injections or overheating of some surface. H/(H+D) got as low as 4% during when we raised the density to 1e20/m^2.

Session Leader Comments
Jun 5 2012 09:09:08:660AM	1120605001	Chi Gao	plan: Locked mode. load from 1120502009 result:no power. Next: try again
Jun 5 2012 09:57:00:513AM	1120605002	Chi Gao	plan: Locked mode. load from 1120502009 result: Good locked mode. But argon level is low. We will get another locked mode later today. only channels 1-4 of FRCECE working for this shot Next: 0.8MA. Low density. nl04 ~ 0.4
Jun 5 2012 09:55:12:347AM	1120605003	Chi Gao	plan: 0.8MA. Low density. nl04 ~ 0.4 result: Good shot. nl04 ~ 0.32. CaF2 injectio from 0.6 - 1.4s, 10Hz. Te increase in the core, and amplitude increases when going inner. (Evidence of non-pure diffusion) Next: 0.8MA. Medium density. nl04 ~ 0.48
Jun 5 2012 09:55:38:337AM	1120605003	Chi Gao	plan: 0.8MA. Low density. nl04 ~ 0.4 result: Good shot. nl04 ~ 0.32. CaF2 injectio from 0.6 - 1.4s, 10Hz. Te increase in the core, and amplitude increases when going inner. (Evidence of non-pure diffusion) Next: 0.8MA. Medium density. nl04 ~ 0.48. Increase CaF2 spot size(cell access).
Jun 5 2012 09:58:43:143AM	1120605004	Chi Gao	plan: 0.8MA. Medium density. nl04 ~ 0.48 result: fizzle Next: try again
Jun 5 2012 10:23:07:507AM	1120605005	Chi Gao	plan: 0.8MA. Medium density. nl04 ~ 0.48 result: fizzle Next: try again
Jun 5 2012 10:45:22:017AM	1120605006	Chi Gao	plan: 0.8MA. Medium density. nl04 ~ 0.48 result: early disruption Next: try again
Jun 5 2012 11:00:10:240AM	1120605007	Chi Gao	plan: 0.8MA. Medium density. nl04 ~ 0.48 result: fizzle Next: try again
Jun 5 2012 11:41:42:920AM	1120605008	Chi Gao	plan: 0.8MA. Medium density. nl04 ~ 0.48 result: fizzle Next: try again

Physics Operator Comments
Jun 5 2012 08:44:06:067AM		Jim Irby	Had ECDC overnight b-main successfully pulsed to >1e-4 Torr this morning loaded 1120502009 ---- locked mode in seg 4 enables import seg 1 from 1120601027 into seg 1 --- startup from last Friday open tree done EF4U at -1270 A prepuff 31 ms PG1 from 300 to 375 ms, enabled seg 1 TF from 153 to 150 kA --- no jump at +100 ms open tree done
Jun 5 2012 09:11:49:957AM	1120605001	Jim Irby	Probable ACK failure ---- will just try again.
Jun 5 2012 09:31:38:673AM	1120605002	Jim Irby	changes -------------------------------- no dpcs changes results -------------------------------- plasma --- nice locked mode Argon level was too low for a good calibration
Jun 5 2012 09:45:16:250AM	1120605003	Jim Irby	changes -------------------------------- load from 1120106020 import seg 1 form 1120605002 into seg 1 Otd nl04 request to 0.36e20/m^2 (seg 2) Otd results -------------------------------- plasma into rampdown --- lots of runaways
Jun 5 2012 10:08:18:730AM	1120605004	Jim Irby	changes -------------------------------- enabled pg5 (h-bottom) from 0.3 to 0.34 s at 100% He4 nl04 request from 0.38 to 0.48e20 /m^2 Otd results -------------------------------- fizzle
Jun 5 2012 10:31:50:777AM	1120605005	Jim Irby	changes -------------------------------- gas was a little high on the last shot, but will be lower for this shot so.. no dpcs changes results -------------------------------- fizzle we were not getting data on Bz0 and Br0, Z, R, loop voltage, etc, until this shot
Jun 5 2012 10:55:50:900AM	1120605006	Jim Irby	changes -------------------------------- prepuff from 31 to 29 ms Otd results -------------------------------- plasma for 0.4399 s --- oscillation on oh currents early, but that does not seem to be the cause of the disruption --- no injections?
Jun 5 2012 11:10:58:777AM	1120605007	Jim Irby	changes -------------------------------- no dpcs changes results -------------------------------- fizzle --- lots of CIII --- br0 low OH2U,L currents are not correct at t=0
Jun 5 2012 11:19:02:910AM	1120605008	Jim Irby	changes -------------------------------- bz0 from .001 to .002 T gas from 29 to 28 ms results --------------------------------
Jun 5 2012 11:41:42:687AM	1120605008	Jim Irby	Data system problems: IGOR failure Cycle reset Servers reset --- still problem with recool light (not green) Bill checked out OH2U supply --- small offsets in feedback signal found, optical link reset
Jun 5 2012 12:35:55:970PM	1120605009	Jim Irby	changes -------------------------------- Moving to polar part of run load from 1120601027 Otd prepuff to 28 ms Otd results -------------------------------- plasma into rampdown Will and Peng enter cell to check out #2 amplifier
Jun 5 2012 12:58:31:293PM	1120605010	Jim Irby	changes -------------------------------- nl04 density request from 3.8e19 to 5e19 /m^2 --- density control was poor. see if we can do a little better. gains already fairly high Otd prepuff from 28 to 26 ms Otd results -------------------------------- plasma into rampdown --- density much flatter 20 kA glitch in Ip at 0.65 s followed by small injection at 0.75 s
Jun 5 2012 01:19:37:420PM	1120605011	Jim Irby	changes -------------------------------- polar sample freq from 20 to 10 MHz TF request from 153 to 150 kA in seg 1 --- eliminate jump in TF field as we go into seg 2 Otd results -------------------------------- plasma into rampdown ---
Jun 5 2012 01:40:12:723PM	1120605012	Jim Irby	changes -------------------------------- repeat results -------------------------------- plasma into rampdown
Jun 5 2012 01:51:33:990PM	1120605013	Jim Irby	changes -------------------------------- repeat results -------------------------------- plasma into rampdown note we still have a gitch in Ip at 0.65 s -- caused by 500 A oscillation in OH2U,L supplies
Jun 5 2012 02:16:00:310PM	1120605014	Jim Irby	repeat plasma into rampdown
Jun 5 2012 02:15:38:673PM	1120605015	Jim Irby	changes -------------------------------- repeat results -------------------------------- plasma for 1 s ---- injection
Jun 5 2012 02:32:04:507PM	1120605016	Jim Irby	changes -------------------------------- no dpcs changes --- make sure we can get full length plasma results -------------------------------- plasma into rampdown
Jun 5 2012 02:50:32:427PM	1120605017	Jim Irby	changes -------------------------------- Ip ramped up by 50 kA at 1.1 s and back down at 1.2 s Otd results -------------------------------- plasma into rampdown
Jun 5 2012 03:12:46:837PM	1120605018	Jim Irby	changes -------------------------------- Tf to 6.0T --- 165 kA results -------------------------------- plasma into rampdown
Jun 5 2012 03:27:35:743PM	1120605019	Jim Irby	changes -------------------------------- load from 1120605017 --- go back to 5.45 T TF start from -1.0 to -1.1 s Otd results -------------------------------- plasma into rampdown --- but we didn't get the earlier TF --- OPS setting was still at -1.0 s
Jun 5 2012 03:41:34:413PM	1120605020	Jim Irby	changes -------------------------------- try again for -1.1 s TF start results -------------------------------- plasma into rampdown ---- got -1.1 s start
Jun 5 2012 04:10:20:557PM	1120605021	Jim Irby	changes -------------------------------- Ip toggle now -550 kA from 1.1 to 1.2 s, -450 kA from -1.2 to 1.3 s, then back to -500 kA. Otd results -------------------------------- plasma into rampdown
Jun 5 2012 04:23:12:490PM	1120605022	Jim Irby	changes -------------------------------- repeat results -------------------------------- plasma into rampdown
Jun 5 2012 04:38:34:590PM	1120605023	Jim Irby	changes -------------------------------- nl04 request to 0.8e20 /m^2 Ip to 800 kA early, then ramp back down to 500 kA Otd results -------------------------------- plasma into rampdown current ramp very clear on polar
Jun 5 2012 04:57:17:353PM	1120605024	Jim Irby	repeat
Jun 5 2012 05:45:31:930PM	1120605025	Jim Irby	changes -------------------------------- nl04 to 1e20/m^2 Otd results -------------------------------- plasma for 1.25 s

Engineering Operator Comments
Shot	Time	Type	Status	Comment
1	08:59:20:120AM	Plasma	Bad	State ACK Failure
2	09:19:01:817AM	Plasma	Ok
3	09:38:25:270AM	Plasma	Ok
4	09:55:44:203AM	Plasma	Ok
5	10:15:07:843AM	Plasma	Ok
6	10:34:23:650AM	Plasma	Ok
7	10:52:58:953AM	Plasma	Ok
8	11:38:13:943AM	Plasma	Bad	OH
9	12:20:13:923PM	Plasma	Ok
10	12:45:00:093PM	Plasma	Ok
11	01:06:16:373PM	Plasma	Ok
12	01:19:49:243PM	Plasma	Ok
13	01:39:01:893PM	Plasma	Ok
14	01:52:44:767PM	Plasma	Ok
15	02:07:54:927PM	Plasma	Ok
16	02:21:33:980PM	Plasma	Ok
17	02:36:32:743PM	Plasma	Ok
18	02:58:41:137PM	Plasma	Ok
19	03:17:17:187PM	Plasma	Ok
20	03:35:11:360PM	Plasma	Ok
21	03:53:12:393PM	Plasma	Ok
22	04:09:19:903PM	Plasma	Ok
23	04:26:17:757PM	Plasma	Ok
24	04:43:23:060PM	Plasma	Ok
25	05:00:28:680PM	Plasma	Ok

System Availability

Jun 5 2012 08:58:58:180AM

System Available Comment Availability Changed Owner Description Who Can Change Active MHD no secured - tagged out Jun 2 2008 11:03:58:433AM (sears) Joe Snipes Active MHD Antenna golfit BES yes BES system is online Nov 22 2011 02:21:12:050PM (bespam) Bill Rowan Beam Emission Spectroscopy bespam,liao,rowan Bolometers yes Midplane diodes functioning properly. Midplane bolometers working and calibrated. DIV bolometers installed but not yet toaster calibrated Apr 20 2012 09:57:29:520AM (mlreinke) Matt Reinke Bolometers hutch,mlreinke Boronization no Bottle has been disconnected from gas lines and plugged. It is being stored in the diborane cabinet. Feb 29 2012 07:47:39:617AM (dekow) Jim Irby Boronization dekow,irby CECE no   Jan 6 2012 03:48:47:060PM  Anne White Correlation ECE whitea CNPA yes Multiple channel CNPA available, no safety risk for in-vessel access Apr 14 2011 12:01:59:693PM (parker) Ron Parker Compact Neutral Analyzer parker Cryopump - Upper Divertor no Off line. Helium dewar to be installed Monday 5/14/12 May 10 2012 08:45:54:900AM (labombard) Brian LaBombard Upper Divertor Cryopump dekow,irby,labombard CXRS yes core-CXRS system is online Nov 22 2011 02:21:22:280PM (bespam) Bill Rowan Charge Exchange Spectroscopy bespam,blip,liao,rachmcd,rowan CXRS edge yes Michael CHurchill has primary responsibility at the moment Apr 19 2011 11:44:46:247AM (blip) Bruce Lipshultz Measurement of CXR light in the pedestal region at both the high- and low-field sides blip,rmchurch D Alpha yes \ha2_bright is available; \SPECTROSCOPY::TOP.VUV.VIS_SIGNALS:MCP_VIS_SIG1 is not available Jul 1 2009 09:45:41:090AM (terry) Jim Terry Balmer Alpha Monitor irby,terry,wolfe Dalsa no system is is installed and aligned, but not functional (appears to be a broken cable) Dec 5 2011 02:41:42:867PM (marmar) Earl Marmar Visible Bremsstrahlung Imaging marmar Disruption Mitigation yes two gas jet valves active as of Feb 2012 May 15 2012 10:09:23:597AM (granetz) Robert Granetz Gas Jet granetz,whyte Divertor IR no   Mar 6 2007 10:50:41:677AM  Glen Wurden Divertor IR Digital Video gwurden,terry Divertor IR Spectroscopy no   Mar 6 2007 10:51:39:897AM  Glen Wurden Divertor IR Spectroscopy gwurden,terry DMBolo AXUV diodes yes Diodes are taking usable data. Not all post-processing code is working yet. Feb 1 2012 01:24:23:953PM (golynyk) Geoff Olynyk Set of six AXUV diodes in a toroidal array of midplane wall boxes. golynyk,granetz,mlreinke,whyte DNB yes "The beam could break at any moment." May 15 2012 10:09:52:470AM (granetz) Robert Granetz Diagnostic Neutral Beam dterry,granetz,mochung ECDC yes   Apr 26 2012 03:23:19:057PM (dekow) Jim Irby 2.45 GHz, 3 kW, discharge cleaning system dekow,irby,pfeiffer FRC-ECE yes FRC-ECE is online May 14 2012 11:53:01:693AM (bespam) Perry Phillips Heterodyne ECE-32 channels bespam,liao,phillips,rowan,whitea FTCI yes System Operational May 14 2012 11:50:45:590AM (irby) Jim Irby Fast two-color interferometer irby G-Side Ratiomatic yes Installed April 25,2012 May 1 2012 05:03:39:313PM (toland) Brian LaBombard G-side ratiomatic ionization gauge labombard,toland Glow Discharge no HV cables disconnected and power supplies off. Electrical plugs have been disconnected, capped and red tagged. Mar 5 2012 10:21:53:460AM (dekow) Jim Irby 1 kV, 5 A, glow discharge system dekow,dterry,irby GPC yes Operational Apr 27 2012 07:41:46:907AM (hubbard) Amanda Hubbard ECE Polychromater hubbard GPC2 yes Operational Apr 27 2012 07:42:03:317AM (hubbard) Amanda Hubbard ECE Polychromater hubbard GPI yes The Xpt-view, the midplane-view cameras are operational. The innerwall GPI (coupled to the fast-diodes) is available. Jul 1 2009 09:45:50:933AM (terry) Jim Terry Gas Puff Imaging terry,zweben H/D yes system is functional and taking data Dec 5 2011 02:42:29:857PM (marmar) Earl Marmar H/D Ratio marmar HEAT yes   Apr 26 2012 03:23:49:607PM (dekow) Gary Dekow - Machine Heaters - burke,dekow Hirex Jr yes Hirex-Jr has been installed Jun 28 2010 03:36:33:420PM (rice) John Rice High Resolution X-Ray ince,rice Hirex Sr yes Installed and aligned. Will be available for Ti/Vr profiles after focusing tests and locked modes are taken. Dec 6 2011 08:21:02:453AM (ypodpaly) John Rice High Resolution X-Ray cgao,ldelgado,rice,ypodpaly HXR yes 32 Channels operational,, no safety risk for in-vessel access Apr 14 2011 12:05:24:810PM (parker) Ron Parker Hard X-Ray Array faust,parker,schmidt ICRF D-Antenna yes   May 31 2012 09:20:06:827AM (wukitch) Steve Wukitch D-port antenna wukitch,ylin ICRF E-Antenna yes   May 31 2012 09:19:57:640AM (wukitch) Steve Wukitch E-port antenna wukitch,ylin ICRF J-Antenna yes   May 31 2012 09:19:47:443AM (wukitch) Steve Wukitch J-port antenna wukitch,ylin Impurity Spectroscopy yes Being upgraded with better optics and new spectrographs. Dan Miller has primary responsibility. Apr 19 2011 11:46:02:193AM (blip) Bruce Lipshultz Measurement of recycling light and impurity source rates at multiple surfaces around the tokamak blip,miller Laser Blow-Off yes Pumped Down, Laser has not yet been tested but otherwise operational May 14 2012 04:31:17:037PM (nthoward) Martin Greenwald Impurity Injection System g,nthoward Lower Hybrid no LH is now safe for manned entry into machine. Positioner locked and tagged off. Switches locked in dummy load position. Mar 2 2012 02:34:28:943PM (dterry) Ron Parker Lower Hybrid dterry,parker,wallaceg Lower Hybrid Reflectometer no off Apr 15 2011 08:24:27:930AM (dominguez) Arturo Dominguez Lower Hybrid Reflectometer dominguez,marmar,parker,sgbaek LoWEUS yes LoWEUS viewing the 10-30 nm region, spectral brightness vs. lambda and time are being stored in tree. Apr 20 2012 10:43:34:077AM (mlreinke) Matthew L. Reinke Long Wavelength Extreme Ultraviolet Spectrometer markchil,mlreinke LPI no Beam line removed May 30 2008 02:09:12:833PM (bose) Earl Marmar Lithium Pellet Injector bose,marmar Ly-alpha yes Midplane Lyman-a. New B-PORT Lyman (BPLY) still being debugged. Apr 20 2012 10:44:00:540AM (mlreinke) Matt Reinke Lyman alpha cameras faustian,labombard,mlreinke Magnetics yes   Dec 1 2011 11:51:51:970AM (g) Robert Granetz Bp coils and flux loops for equilibrium control granetz,wolfe McPherson no McPherson viewing the 10-14 nm region for molybdenum monitoring. It's days are numbered as LoWEUS has demonstrated superiority. Apr 20 2012 10:44:10:937AM (mlreinke) Jim Terry VUV Spectrometer markchil,mlreinke,terry Michelson yes Vacuum 3-4e-8 T. Starting with Michelson at reduced speed. Apr 27 2012 07:42:41:960AM (hubbard) Amanda Hubbard ECE Te Profiles hubbard,schmidt MKS yes   Dec 2 2011 12:27:47:163PM (toland) Brian LaBombard Baratron pressure gauges labombard,toland MLP yes Operational. Connected to A-port probe system May 10 2012 08:40:19:910AM (labombard) Brian LaBombard Mirror Langmuir Probe Electronics System labombard MSE yes 2/29/2012 MSE operational. No HV or vacuum safety issues Feb 29 2012 12:26:13:863PM (sscott) Steve Scott Motional Stark Effect jinseok,sscott Neutrons yes Voltage is on for He3 detectors on J port. Remaining voltages will be turned on for the first run. Apr 23 2012 09:31:22:063AM (fiore) Catherine Fiore Neutron Detectors fiore Neuts and Hards yes All detectors Powered On --- Waiting for neutrons for calibration Nov 22 2011 01:05:24:380PM (irby) Jim Irby X-Ray/Neutron Detectors at K-Hor irby NINJA yes C-bottom and new F-bottom system ready. Dec 2 2011 12:28:44:843PM (toland) Brian LaBombard NINJA gas puff labombard,terry,toland PCI yes Operational. May 1 2012 08:31:33:743AM (ntsujii) Miklos Porkolab Phase Contrast Imaging emd,ennever,ntsujii,porkolab Penning Gauges yes HV power supplies turned ON in INIT, off in RECOOL May 10 2012 08:41:03:000AM (labombard) Brian LaBombard Penning Ionization Gauges labombard Plasma TV yes WIDE1, WIDE2 (chan 33), DANT, JANT and DIV are operational. Jul 1 2009 09:46:29:543AM (terry) Jim Terry Video of plasma via several cameras dekow,irby,terry,wolfe Polarimeter yes 3 chords operational but with high noise level Jan 6 2012 04:22:20:903PM (irby) Jim Irby C-Mod Polarimeter irby Power - Alternator Air Switch yes   Apr 26 2012 03:24:21:607PM (dekow) Gary Dekow Alternator to Power Room Power Supply Connection cochran,dekow,dterry,irby Power - PEI yes   Apr 26 2012 03:24:41:250PM (dekow) Gary Dekow PEI System cochran,dekow,dterry,irby Power - TMX yes   Apr 26 2012 03:24:57:153PM (dekow) Gary Dekow Ef2s,. EFCs and A-Coils byford,cochran,dekow,dterry,irby Power Systems yes   Apr 26 2012 03:25:14:497PM (dekow) Jim Irby C-Mod Magnet Supplies byford,cochran,dekow,dterry,irby Probe Array - ISD yes Operational. Some dead probes. May 10 2012 08:41:58:120AM (labombard) Brian Labombard Inner Lower Divertor Probe Array labombard Probe Array - LH yes Operational. 4 out of 6 probes working. May 10 2012 08:41:40:557AM (labombard) Brian LaBombard Lower Hybrid Probe Array labombard Probe Array - OSD yes Operational. May 10 2012 08:42:13:733AM (labombard) Brian LaBombard Outer Lower Divertor Probe Array (F and J) labombard Probe Array - UDIV yes Operational. Some dead probes. May 10 2012 08:42:32:663AM (labombard) Brian LaBombard Upper Divertor Probe Array labombard Reflectometer yes As of 1120508, the 60, 75, 88s, 112, 140 and variable are connected and turned on. May 8 2012 10:33:21:567AM (dominguez) Earl Marmar Reflectometer dominguez,marmar Scanning Probe - ASP yes Operational. A variety of probe heads are ready for use. May 10 2012 08:43:10:937AM (labombard) Brian LaBombard A-Port Scanning Probe labombard Scanning Probe - FSP yes Operational. May 10 2012 08:43:24:887AM (labombard) Brian LaBombard F-Port Scanning Probe labombard Scanning Probe - WASP no Not functioning. Probe tips are melted. Repair not performed during break. May 10 2012 08:44:43:137AM (labombard) Brian LaBombard Inner Wall Scanning Probe labombard,nsmick Shoelace Antenna yes Operational May 10 2012 08:45:08:320AM (labombard) Brian LaBombard High-k active MHD antenna, for QCM, WCM studies golfit,labombard SOL reflectometer yes c-port (top, middle, bottom) and h-port available. Only 1 of 4 locations can be used for each discharge May 1 2012 04:54:58:820PM (cornwall) Cornwall Lau SOL reflectometer cornwall,wukitch,ylin Sparker yes Sparker Power Supply powered up. Connected at K port using red cable 4/23/12 9:25AM Apr 23 2012 12:06:10:983PM (parkin) Jim Irby Field Emission Preionization for C-Mod dekow,irby,parkin Surface Science Station no SSS is up to air, no safety issues. Feb 27 2012 01:51:48:783PM (ochoukov) Bruce Lipschultz Radially scanning probe located on K-port blip,ochoukov TCI yes TCI lasers in operation May 14 2012 11:51:18:700AM (irby) Jim Irby Two-Color Interferometer irby,murray TS - Core yes Operating with one 50Hz laser, precise density calibration still required. May 9 2012 03:12:32:050PM (jwhughes) Jerry Hughes Core Thomson scattering jrwalk,jwhughes,yma TS - Edge yes Operating with one 50Hz laser, precise density calibration still required. May 9 2012 03:12:51:363PM (jwhughes) Jerry Hughes Millimeter resolution edge Thomson scattering jrwalk,jwhughes,yma Vispec no 350 and 670 nm, 4 spatial channels Nov 28 2007 09:58:35:493AM (agraf) Alex Graf Visible Spectrometer agraf XEUS yes XEUS viewing the 1-6 nm region, spectral brightness vs. lambda and time are being stored in tree. Apr 20 2012 10:43:43:107AM (mlreinke) Matt Reinke X-ray Extended Ultraviolet Spectrometer markchil,mlreinke XTOMO yes ARRAY1->5 available. Specific channels on various arrays display issues. Apr 20 2012 05:36:28:523PM (faustian) Robert Granetz X-Ray Tomography faustian,granetz,mlreinke