Miniproposals

Miniproposal: Date Filed: Title: First Author: Session Leader: Tom Luke (shots 1-6)

Engineering Operator Run Comment

test puff valve

Session Leader Plans

Physics Operators Plans

Session Leader Summaries

Physics Operator Summaries

Session Leader Comments
Sep 27 1993 02:12:01:280PM	930927001	Tom Luke	Shot 2, 3 puffs. Each is 10 ms long at 0,.5 and 1.0s into the shot. The pulse heights are as follows: 40, 60 , 80 V.. We do not see the 40 V pulse but the second and third pulses are clear on the gauge.
Sep 27 1993 02:38:28:920PM	930927002	Tom Luke	Shot 3, 3 puffs. Each is 10 ms long at 0,.5 and 1.0s into the shot. The pulse heights are all 80 V. Seems like we got too much gas into the machine in the prefill.
Sep 27 1993 02:45:40:170PM	930927002	Tom Luke	Shot 4. Same as shot 3. 3 puffs. Each is 10 ms long at 0,.5 and 1.0s into the shot. The pulse heights are all 80 V. Looks like its working. Can see the rise in pressure clearly. Looks like the rise decreases from puff 1 to 3.
Sep 27 1993 03:00:07:840PM	930927004	Tom Luke	Shot 5. 3 puffs. At 0,.5 and 1.0s into the shot. Pulse lengths are 10, 20, 40 ms The pulse heights are all 60 V. Data looks good.
Sep 27 1993 03:13:46:320PM	930927005	Tom Luke	Shot 5. 3 puffs. At 0,.5 and 1.0s into the shot. Pulse lengths are 10, 20, 40 ms The pulse heights are all 40 V. See the puffs but at the lower voltage it seems like there is a greater effect due to the time history. The last puff increases the amount put in by more than a factor of 2.
Sep 27 1993 03:25:21:210PM	930927006	Tom Luke	Shot 5. 3 puffs. At 0,.5 and 1.0s into the shot. Pulse lengths are 10, 20, 40 ms The pulse heights are all 80 V. Got data.

Physics Operator Comments

Engineering Operator Comments
Shot	Time	Type	Status	Comment
1	02:06:20:950PM	Plasma	Ok
2	02:19:06:090PM	Plasma	Ok	Gas Puff Test
3	02:40:25:710PM	Plasma	Ok	Gas Puff Test
4	02:55:21:120PM	Plasma	Ok	Gas Puff Test
5	03:07:46:710PM	Plasma	Ok	Gas Puff Test
6	03:19:58:950PM	Test	Bad