Alcator C-Mod Run 951218 Information

Back to runs

Miniproposals
Miniproposal:
Date Filed:
Title:
First Author:
Session Leader:Jeff Schachter (shots 1-34)

Operators
Session leader(s):Jeff Schachter
Physics operator(s):John Goetz
Engineering operator(s):Vinny Bertolino,Joe Daigle

Engineering Operator Run Comment
goetz

Session Leader Plans

Physics Operators Plans

Session Leader Summaries
Entered: Jul 7 2004 03:49:14:850PM
Author: To Be Determined
Run Summary for MP 122A - Rho-Star Scaling - Jeff Schachter
==========================================

Overall, a good day - we were 30 for 30 on shots required. We ran the
following fields:

Field Shots
------ ------
2.6 003-017, 022
3.5 018-021,023,024
5.3 025-032

Please see the logbook under the topic SESSION_LEADER for shot to shot details.
(Note that the NUSTAR result quoted is not in the correct units.)

We ran 1.5 s flattops for shots 007-024. Breakdown was at 4.8 T, and the TF
was ramped down to the appropriate field value. The portion of the lower field
flat top that is usable in the rho-star analysis usually began around 0.78 s
and lasted until 1.5 s.

Rf was used in the 5.3 T shots starting at shot 027.

The digitization rate on the Visible Brem. Array was changed from its usual
setting for shots 008-020. Either this screwed up the data itself, or Earl's
analysis program choked, but the data needs to be looked at. We changed the
rate back for shot 021. Shot 022 was a rerun of shot 012 to get a Zeff
measurement.

YAG data is bogus for shots 027-032. This could be a problem, since I was
using the YAG Te0 to gauge the goodness of the shot for rho-star scaling.
Fortunately, this was at 5.3 T, so we have ECE data. I need to go back and
verify that the shots marked as good will indeed be useful.

4 different parameter ranges were obtained at 2.6 T - only one of which will be
possible to obtain at 8.0 T (group 1). Here are the shot groupings for today's
run (only shots that have good parameters are listed):


GROUP 1 Ip (kA) Nel20 Te (keV) RF Power (kW)
======= ======= ===== ======= ========
2.6 T: 011, 012, 014, 022 300 0.45 0.95 0
3.5 T: 020, 021 410 0.65 1.05 0
5.3 T: 030, 031 615 1.15 1.5 800 (must check)

GROUP 2
=======
2.6 T: 009, 010 350 0.53 0.93 0
3.5 T: 018, 019 470 0.79 1.15 0

GROUP 3
=======
2.6 T: 016 400 0.40 0.85 0
3.5 T: 023, 024 525 0.7 1.0

GROUP 4
=======
2.6 T: 017 400 0.6 1.2 0


We may need to rerun the group 1 5.3 T shots, depending on how well the ECE
Te's do in the first group. We also need 5.3 T shots for groups 2-4, and 8.0 T
shots for group 1. Therefore another run would be nice.


Physics Operator Summaries
Entered: Jul 7 2004 04:36:55:647PM
Author: To Be Determined
Physics operator summary for 951218

EO: Bertolino/Daigle
PO: Goetz
SL: Schachter

Run 951218 was in support of Mini-Proposal #122A - Rho-star Scaling.
The goal of this run is to obtain a set of plasmas at 2.6T, 3.5T,
5.3T and 8.0T that are suitable for rho-star scaling analysis.

Program for this run:
- Set up a diverted shot with: Ip Bt ne20 heating
.35 2.6 .43 OH
.48 3.5 .65 OH
.73 5.3 1.1 ICRF
1.1 8.0 2.0 ICRF
- Make plasmas with dimensionless parameters (except rho-star)
as similar as possible.

See the session leader's summary for a report on this program.

Some things discovered today:
1) Very reliable startup today. Very good current rises and low impurity
levels. There was a string of 30 straight shots. This string was
interrupted by a 'strong' fizzle, which was the fiducial shot. The
Br offset change was not in the shot loaded.
2) Breakdowns were obtained at values of the toroidal field from 4.8 to
5.4T. The only knob touched for these was the TF current. Fill
pressure was approximately 2.0e-5 in nitrogen units. Impurity levels
during current rise were low.
3) Hybrid control of the TF current worked well, no problems were
encountered. The scale factor is 28kA of TF current gives 1T.
4) The controllers are not really orthogonal. Much care was needed to
keep the gaps the same shot-to-shot as the current was changed. Also,
there seems to be a 0.1e20 offset on NL04 - drawing 0.5e20 results in
0.6e20.
5) Pulse lengths were extended to 1.5sec for the 2.6T and the 3.5T
discharges. A pulse length of 1.2sec was used for the 5.3T discharges.
Disruptions were occurring @ ~1.65sec, not much time was spent
investigating the cause as the disruptions were relatively benign.

Engineering, computing, and diagnostics today: Engineering tests were
performed on shots 001 and 002 to check the OH coax resistances.
Troubles with the YAG after shot 026. Some CAMAC errors today,
but not many.

Scorecard: 34 shots = 31 plasmas + 1 fizzles + 2 tests

Shot summary for Run 951218:

Load 951212015
TF current waveform = -150 on [-1.5,+.019]; -73 on [+.02,1.1]; 0
switch closing times: EF1's @ 0.1 and OH's @ 0.12
V_OH1 spike = 250V @ 0.12; reduce to 100V from there on
IP = -350000kA
NL04 = 0.5e20
remove RF loading feedback from RCUR
coldstart hybrid - all matrices respond

Shot change result
____ _____ ______
1 eng. test shot for OH no CAMAC

2 eng. test shot for OH resistances o.k.

3 see above plasma - disr. @ 1.28; Ip=0.35MA;
Bt=2.8T; NL04=0.6e20

4 remove 6kA from TF; draw plasma - disr. @ 1.24; Bt=2.6T; Ip=0.35
NL04=0.4e20; PG3=30V NL04=0.5e20; o.gap decreasing

5 TF=-138 @ breakdown; RCUR plasma - disr. @ 1.23; Bt=2.6T @ 0.75s
ramped out to 0.675m; 1/2 hr density drooping a bit; o.gap o.k.;
wait to cool Michelson i.gap growing

6 TF current = -133kA; more early plasma - disr. @ 1.21; Bt=2.6T@0.70s
gas; extend PG3 to 1sec; remove
CLEARIN ramp - const. @ -.005

7 extend all P's, V's, and gains plasma - disr. @ 1.57; Ip drooping
to 1.5sec strikes moving up the plates

8 extend EF2 and OH2 waveforms; plasma - disr. @ 1.58;
4msec Ar; IC_EF4 gain to 3

9 RCUR = 0.68; lower Marmar puff plasma - disr. @ 1.63; o.gap=1.4cm;
i.gap=2.0cm

10 remove Marmar puff; CLEARIN = plasma - disr. @ 1.67; i.gap=1.8cm
-.008; hold out RXL longer

11 IP=-300000; NL04=0.3e20 plasma - disr. @ 1.66; nice shot

12 early gas to combat Mo influx plasma - disr. @ 1.64; NL04=0.45e20

13 PG3=28V; RXL constant thru shot plasma - disr. @ 0.74; cause!?!?!

14 no changes plasma - disr. @ 1.54; RF causes a
droop in current @ 1.46

15 IP = -400000 plasma - disr. @ 0.65; no explanation

16 no changes plasma - disr. @ 1.52; o.gap=1.0cm

17 NL04=0.5e20 plasma - disr. @ 1.64; NL04=0.69e20

18 IP=-500000 @ .122 then ramp plasma - disr. @ 1.67; current drooping;
to -470000; TF curr = 98kA; density too low; small gaps
NL04=0.69e20

19 TF current = 94kA; NL04=0.72e20 plasma - disr. @ 1.68; acceptable shot
slight ramp in IP; RCUR=0.673;
CLEARIN=-.008

20 IP=-410000; NL04=0.57e20; plasma - disr. @ 1.69; not quite right
RCUR=0.675; CLEARIN=-.009

21 NL04=0.58e20; RCUR=0.676; plasma - disr. @ 1.68; NL04=0.67e20
CLEARIN=-.007

22 reload 951218012 plasma - disr. @ 1.56; looks o.k.

23 reload 951218021; IP=-530000; plasma - disr. @ 1.25; plasma retching
NL04=0.83e20 like a jackal @ 0.92sec; o.gap=0.9cm

24 RCUR=0.673 plasma - disr. @ 1.67; unacceptable -
no YAG

25 rampdown@1.2; IP=-615000; plasma - disr. @ 1.47; Ip droops; 5.4T;
NL04=1.15e20; TF curr = -148 NL04=1.1e20 barely
(5.3T); PG3 off at 1.2sec

26 TF current = -145kA; IP ramp plasma - disr. @ 1.52; Ip o.k.; Bt o.k.;
to -630kA; PG3=34V; RCUR=0.67; density not there yet
CLEARIN=-.005

27 PG3 = 37V and 50V early in 2 plasma - disr. @ 1.50; density flat but
only 1.0->1.1

28 PG3=41V and NL04=1.25e20 plasma - disr. @ 1.46; NL04=1.1 -> 1.2

29 more PG3 between 0.2 and 0.5 plasma - disr. @ 1.44; density o.k.

30 a bit more RF power plasma - disr. @ 1.46; almost a good
match to previous dimensionless params.

31 a bit more RF power plasma - disr. @ 1.45; good match to
previous dimensionless params.

32 IP=-715000; NL04=1.42e20; plasma - disr. @ 1.47; not much right
PG3=46V for scaling purposes

33 load 951212017 for fiducial fizzle -strong - too much Br

34 Br offset = .0064 acceptable fiducial

Session Leader Comments
Dec 18 1995 09:55:54:200AM951218003Jeff SchachterShot: 951218003 Time: 0.900000 Window: 0.100000
Bt = 2.80 T Ip = 0.35 MA Nel20 = 0.60 Te = 1.03 keV Pin = 0.40 MW
a = 20.6671 Zeff = 1.42

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.323571 0.545077 0.984456 0.342116
3.50000 0.435577 0.810185 1.20022 0.619959
5.30000 0.659588 1.40884 1.58270 1.42160
8.00000 0.995604 2.43938 2.08261 3.23897

RHOSTAR: 0.0175949 NUSTAR: 16.4638 BETAP: 0.0793794


Field ~ 2.8 T and not steady. Try for lower field (2.6) and longer,
steadier flattop. Lower density too (though this one is ok.)

Dec 18 1995 09:54:07:970AM951218004Jeff SchachterShot: 951218004 Time: 0.925000 Window: 0.0750000
Bt = 2.58 T Ip = 0.35 MA Nel20 = 0.48 Te = 1.16 keV Pin = 0.39 MW
a = 20.5229 Zeff = 1.66

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.350712 0.487963 1.17164 0.398694
3.50000 0.472113 0.725292 1.42843 0.722486
5.30000 0.714913 1.26122 1.88364 1.65670
8.00000 1.07911 2.18378 2.47860 3.77462

RHOSTAR: 0.0204102 NUSTAR: 12.1200 BETAP: 0.0845737

Better shot - try to lengthen flat top at 2.6 and increase a. Looks
like we have a reasonable window in density and current.

Dec 18 1995 10:16:08:480AM951218005Jeff SchachterShot: 951218005 Time: 0.900000 Window: 0.100000
Bt = 2.58 T Ip = 0.35 MA Nel20 = 0.50 Te = 1.04 keV Pin = 0.41 MW
a = 20.9525 Zeff = 1.70

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.349241 0.504499 1.04510 0.422236
3.50000 0.470132 0.749872 1.27415 0.765147
5.30000 0.711914 1.30396 1.68020 1.75453
8.00000 1.07459 2.25779 2.21090 3.99750

RHOSTAR: 0.0188841 NUSTAR: 16.4728 BETAP: 0.0779960

Flat top could be longer. Left gap ok, fix right gap. Input power may be
too high at 8.0, but thats ok.

Dec 18 1995 10:27:18:400AM951218006Jeff SchachterShot: 951218006 Time: 0.890000 Window: 0.110000
Bt = 2.57 T Ip = 0.35 MA Nel20 = 0.51 Te = 0.99 keV Pin = 0.45 MW
a = 21.0785 Zeff = 1.69

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.348917 0.516892 0.996062 0.454911
3.50000 0.469696 0.768292 1.21437 0.824357
5.30000 0.711255 1.33599 1.60136 1.89030
8.00000 1.07359 2.31325 2.10716 4.30685

RHOSTAR: 0.0183398 NUSTAR: 18.5620 BETAP: 0.0761622

Much better flat top - longer, and density more constant. Try for even
longer - by extending pulse past 1.0 s.

Dec 18 1995 11:02:35:190AM951218007Jeff SchachterBeautiful flattop - nice and long. Will rerun to get Ti profiles from
Hirex.

EFIT problem - will need to be rerun.

Dec 18 1995 11:03:17:890AM951218007Jeff SchachterBeautiful flattop - nice and long. Will rerun to get Ti profiles from
Hirex.

EFIT problem - will need to be rerun.

Dec 18 1995 11:03:19:780AM951218007Jeff SchachterBeautiful flattop - nice and long. Will rerun to get Ti profiles from
Hirex.

EFIT problem - will need to be rerun.

Dec 18 1995 11:17:13:030AM951218007Jeff SchachterShot: 951218007 Time: 1.15000 Window: 0.350000
Bt = 2.57 T Ip = 0.34 MA Nel20 = 0.51 Te = 0.98 keV Pin = 0.43 MW
a = 20.9818 Zeff = 1.53

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.341173 0.517928 0.989604 0.437436
3.50000 0.459272 0.769831 1.20649 0.792690
5.30000 0.695469 1.33867 1.59097 1.81769
8.00000 1.04976 2.31788 2.09350 4.14140

RHOSTAR: 0.0183803 NUSTAR: 16.9448 BETAP: 0.0758200

Dec 18 1995 11:04:27:040AM951218008Jeff SchachterAnother beautiful flattop - nice and long.
Magnetics problem - can't get EFIT data for this shot.
Outer gap is ~ 2.4 cm, should be ~ 1.5 cm.

Dec 18 1995 11:30:22:320AM951218009Jeff SchachterGaps better. Triangularity not constant. Nice flat top otherwise.

Zeff screwed up. Will fix for next shot. Assuming Zeff=1.5...

Shot: 951218009 Time: 1.15000 Window: 0.350000
Bt = 2.57 T Ip = 0.35 MA Nel20 = 0.53 Te = 0.93 keV Pin = 0.47 MW
a = 21.5114 Zeff = 1.50

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.349773 0.537217 0.933991 0.478409
3.50000 0.470848 0.798502 1.13869 0.866939
5.30000 0.712998 1.38852 1.50157 1.98794
8.00000 1.07622 2.40421 1.97585 4.52931

RHOSTAR: 0.0174154 NUSTAR: 19.8712 BETAP: 0.0742242

Dec 18 1995 11:45:10:890AM951218010Jeff SchachterMore zeff problems. Otherwise good.

Shot: 951218010 Time: 1.15000 Window: 0.350000
Bt = 2.57 T Ip = 0.35 MA Nel20 = 0.52 Te = 0.91 keV Pin = 0.46 MW
a = 21.7278 Zeff = 1.50

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.349900 0.528215 0.921725 0.474091
3.50000 0.471019 0.785121 1.12374 0.859114
5.30000 0.713257 1.36526 1.48185 1.97000
8.00000 1.07661 2.36392 1.94990 4.48843

RHOSTAR: 0.0171229 NUSTAR: 20.2636 BETAP: 0.0720220

Next shot: down to nel=0.4, Ip=300.

Dec 18 1995 11:56:50:890AM951218011Jeff SchachterNice flat top. Got 305 kA and nel=0.42. Power scales to 3.5 MW.
Still guessing Zeff (problems).

Shot: 951218011 Time: 1.15000 Window: 0.350000
Bt = 2.57 T Ip = 0.30 MA Nel20 = 0.42 Te = 1.01 keV Pin = 0.37 MW
a = 21.7498 Zeff = 1.50

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.307599 0.428768 1.01587 0.375287
3.50000 0.414076 0.637307 1.23851 0.680069
5.30000 0.627029 1.10822 1.63320 1.55944
8.00000 0.946459 1.91887 2.14906 3.55301

RHOSTAR: 0.0179464 NUSTAR: 13.5549 BETAP: 0.0644336

Dec 18 1995 12:08:57:930PM951218012Jeff Schachterdensity a bit higher, gap off by a few mm. Try again for Hirex.

Shot: 951218012 Time: 1.15000 Window: 0.350000
Bt = 2.57 T Ip = 0.30 MA Nel20 = 0.44 Te = 0.94 keV Pin = 0.40 MW
a = 21.3118 Zeff = 1.50

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.301872 0.446125 0.950190 0.409576
3.50000 0.406366 0.663106 1.15844 0.742205
5.30000 0.615354 1.15308 1.52761 1.70192
8.00000 0.928836 1.99654 2.01012 3.87764

RHOSTAR: 0.0177251 NUSTAR: 15.7960 BETAP: 0.0627077

Dec 18 1995 12:16:13:890PM951218013Jeff SchachterDisruption at 0.75 s.

Dec 18 1995 12:28:07:610PM951218014Jeff SchachterNice... use with 12.

Shot: 951218014 Time: 1.15000 Window: 0.350000
Bt = 2.57 T Ip = 0.30 MA Nel20 = 0.43 Te = 1.04 keV Pin = 0.37 MW
a = 21.5851 Zeff = 1.50

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.304580 0.434974 1.04773 0.379031
3.50000 0.410012 0.646532 1.27736 0.686853
5.30000 0.620875 1.12426 1.68443 1.57500
8.00000 0.937170 1.94664 2.21647 3.58846

RHOSTAR: 0.0183879 NUSTAR: 12.8294 BETAP: 0.0674168

Next: stay at nel=0.4. Ip=400 kA.

Dec 18 1995 12:36:15:570PM951218015Jeff SchachterDisruption. 0.63 s

Dec 18 1995 12:54:10:330PM951218016Jeff SchachterGood shot. Nel=0.4, Ip=400 kA. Out of range for 8.0 T, but can do at
5.3 T.

Shot: 951218016 Time: 1.15000 Window: 0.350000
Bt = 2.57 T Ip = 0.39 MA Nel20 = 0.44 Te = 1.22 keV Pin = 0.53 MW
a = 22.0286 Zeff = 1.50

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.399883 0.443234 1.23385 0.548118
3.50000 0.538305 0.658808 1.50426 0.993261
5.30000 0.815147 1.14561 1.98364 2.27761
8.00000 1.23041 1.98360 2.61019 5.18928

RHOSTAR: 0.0195629 NUSTAR: 9.62031 BETAP: 0.0808997

Next shot: nel=0.6, Ip=400 kA

Dec 18 1995 01:10:52:730PM951218017Jeff SchachterGood shot. nel=0.6, Ip=400

Shot: 951218017 Time: 1.15000 Window: 0.350000
Bt = 2.57 T Ip = 0.39 MA Nel20 = 0.60 Te = 0.85 keV Pin = 0.57 MW
a = 22.1446 Zeff = 1.50

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.396469 0.614702 0.858109 0.579815
3.50000 0.533708 0.913673 1.04618 1.05070
5.30000 0.808186 1.58880 1.37957 2.40932
8.00000 1.21990 2.75098 1.81532 5.48937

RHOSTAR: 0.0162238 NUSTAR: 27.7293 BETAP: 0.0780298

Next: going to 3.5 T. Scale from shots 9&10.

Dec 18 1995 01:38:55:160PM951218018Jeff SchachterBt a little high, Ip a little low, nel ok. Temperature looks like
its within 5%.

Shot: 951218018 Time: 1.36000 Window: 0.120000
Bt = 3.64 T Ip = 0.45 MA Nel20 = 0.78 Te = 1.03 keV Pin = 0.66 MW
a = 22.3323 Zeff = 1.50

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.324217 0.497173 0.818606 0.337635
3.50000 0.436446 0.738982 0.998018 0.611839
5.30000 0.660903 1.28502 1.31606 1.40298
8.00000 0.997590 2.22500 1.73175 3.19655

RHOSTAR: 0.0124428 NUSTAR: 24.8532 BETAP: 0.0602055

Next: try again.

Dec 18 1995 02:02:03:970PM951218019Jeff SchachterMuch better. Ip and Nel within 5% (density a little low). Compares
well to shots 9,10

Shot: 951218019 Time: 1.00000 Window: 0.500000
Bt = 3.50 T Ip = 0.48 MA Nel20 = 0.75 Te = 1.07 keV Pin = 0.63 MW
a = 21.9332 Zeff = 1.50

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.353760 0.503203 0.880443 0.347380
3.50000 0.476216 0.747945 1.07341 0.629499
5.30000 0.721127 1.30061 1.41548 1.44348
8.00000 1.08849 2.25199 1.86257 3.28881

RHOSTAR: 0.0134834 NUSTAR: 21.3567 BETAP: 0.0655387

Dec 18 1995 02:03:13:460PM951218020Jeff SchachterBetter. Zeff problems.

Shot: 951218020 Time: 1.00000 Window: 0.500000
Bt = 3.50 T Ip = 0.41 MA Nel20 = 0.65 Te = 1.13 keV Pin = 0.51 MW
a = 22.0051 Zeff = 1.50

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.307694 0.433216 0.925437 0.279489
3.50000 0.414203 0.643919 1.12826 0.506470
5.30000 0.627222 1.11972 1.48781 1.16137
8.00000 0.946750 1.93877 1.95775 2.64605

RHOSTAR: 0.0137789 NUSTAR: 16.6965 BETAP: 0.0593069

Dec 18 1995 02:23:24:390PM951218021Jeff SchachterGood. beta low. Zeff fixed.

Shot: 951218021 Time: 1.00000 Window: 0.400000
Bt = 3.51 T Ip = 0.41 MA Nel20 = 0.67 Te = 1.05 keV Pin = 0.56 MW
a = 21.7880 Zeff = 1.32

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.301486 0.446126 0.858466 0.305047
3.50000 0.405846 0.663107 1.04661 0.552785
5.30000 0.614567 1.15308 1.38015 1.26757
8.00000 0.927648 1.99655 1.81608 2.88802

RHOSTAR: 0.0133842 NUSTAR: 17.4750 BETAP: 0.0566544

Dec 18 1995 02:26:39:590PM951218022Jeff Schachterrerun shot 12 (2.6 T, 0.30 MA, Nel20=0.44) in order to get a half
decent Zeff measurement. Earl, where were you?

Dec 18 1995 02:45:25:580PM951218023Jeff SchachterYucky shot. Plasma wretching like a madman. May compare better to 16
than 17.

Shot: 951218023 Time: 0.750000 Window: 0.250000
Bt = 3.51 T Ip = 0.53 MA Nel20 = 0.69 Te = 1.04 keV Pin = 0.77 MW
a = 21.9887 Zeff = 1.43

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.389654 0.465445 0.853557 0.423796
3.50000 0.524534 0.691823 1.04063 0.767974
5.30000 0.794294 1.20302 1.37225 1.76101
8.00000 1.19893 2.08301 1.80569 4.01227

RHOSTAR: 0.0132354 NUSTAR: 20.0641 BETAP: 0.0587699

Dec 18 1995 03:07:19:900PM951218024Jeff SchachterTry again. Compare to 17.
Something happens at 1.2 s: Nel before=0.83, after=0.93. Asked
for 0.91. Ip should be 530 kA.

YAG had init failure, so no data.

Dec 18 1995 03:25:02:430PM951218025Jeff SchachterCompare to 12,21,22
Field too high. Nel not constant.
Te should be 1.5 keV. Is 1.2 keV. Poh=0.9 MW, should be 1.5 MW.
Therefore ask for 0.6 MW. From 0.65 to 1.2 s.

Shot: 951218025 Time: 1.00000 Window: 0.100000
Bt = 5.37 T Ip = 0.61 MA Nel20 = 1.10 Te = 1.22 keV Pin = 0.89 MW
a = 22.2669 Zeff = 1.20

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.293912 0.417906 0.751229 0.209410
3.50000 0.395650 0.621162 0.915873 0.379479
5.30000 0.599127 1.08014 1.20774 0.870168
8.00000 0.904343 1.87026 1.58922 1.98258

RHOSTAR: 0.00922723 NUSTAR: 19.8606 BETAP: 0.0464413

Dec 18 1995 03:30:29:630PM951218026Jeff SchachterBetter. No RF. Looks like we need 600 kW RF.

Shot: 951218026 Time: 0.850000 Window: 0.150000
Bt = 5.27 T Ip = 0.62 MA Nel20 = 1.08 Te = 1.28 keV Pin = 0.87 MW
a = 21.9411 Zeff = 1.29

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.305858 0.419810 0.799755 0.211478
3.50000 0.411732 0.623992 0.975035 0.383226
5.30000 0.623481 1.08507 1.28576 0.878760
8.00000 0.941103 1.87878 1.69187 2.00216

RHOSTAR: 0.00978784 NUSTAR: 18.6110 BETAP: 0.0496665

Dec 18 1995 03:40:35:830PM951218027Jeff SchachterRF. Trips out. Density still a little low. Te low (1.2 should be
1.5). Betap low (0.26; should be 0.3-0.35), nustar high. Therefore go
up in power. Got only 0.8 MW total input power.

Compare to 12,21,22

Shot: 951218027 Time: 1.05000 Window: 0.150000
Bt = 5.27 T Ip = 0.62 MA Nel20 = 1.09 Te = 1.20 keV Pin = 0.83 MW
a = 21.8914 Zeff = 1.52

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.306589 0.426637 0.751367 0.201426
3.50000 0.412716 0.634140 0.916042 0.365010
5.30000 0.624970 1.10271 1.20796 0.836991
8.00000 0.943351 1.90933 1.58951 1.90699

RHOSTAR: 0.00950948 NUSTAR: 25.1137 BETAP: 0.0474203

Dec 18 1995 03:53:39:150PM951218028Jeff SchachterDensity right magnitude. RF ~ 0.6 MW Poh ~ 0.8 MW, Te ~ 1.6 keV.
Too high! WIll try to flat top density sooner.

Shot: 951218028 Time: 0.900000 Window: 0.300000
Bt = 5.26 T Ip = 0.62 MA Nel20 = 1.15 Te = 1.53 keV Pin = 0.81 MW
a = 21.8878 Zeff = 1.36

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.306999 0.449546 0.957781 0.198144
3.50000 0.413268 0.668190 1.16770 0.359062
5.30000 0.625806 1.16192 1.53981 0.823352
8.00000 0.944613 2.01185 2.02618 1.87592

RHOSTAR: 0.0107444 NUSTAR: 14.6282 BETAP: 0.0636933

Dec 18 1995 03:58:10:010PM951218028Jeff SchachterOops. Calculation of total input power was wrong (with RF shots). here
is data for 28 again:

Shot: 951218028 Time: 0.900000 Window: 0.300000
Bt = 5.26 T Ip = 0.62 MA Nel20 = 1.15 Te = 1.53 keV Pin = 1.37 MW
a = 21.8878 Zeff = 1.36

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.306999 0.449546 0.957781 0.334768
3.50000 0.413268 0.668190 1.16770 0.606644
5.30000 0.625806 1.16192 1.53981 1.39107
8.00000 0.944613 2.01185 2.02618 3.16941

RHOSTAR: 0.0107444 NUSTAR: 14.6282 BETAP: 0.0636933

Ask for te=1.5 - got it. Pinput lower than expected (1.4 rather than
1.5 MW). Calculations of input power for 26,27 also wrong.

Dec 18 1995 04:13:13:340PM951218029Jeff SchachterTe too low. Density ok. Raise power for next shot.

Shot: 951218029 Time: 0.900000 Window: 0.300000
Bt = 5.26 T Ip = 0.62 MA Nel20 = 1.15 Te = 1.36 keV Pin = 1.31 MW
a = 21.8517 Zeff = 1.50

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.306351 0.450461 0.852188 0.320780
3.50000 0.412395 0.669551 1.03896 0.581296
5.30000 0.624484 1.16429 1.37005 1.33295
8.00000 0.942617 2.01595 1.80280 3.03697

RHOSTAR: 0.0101553 NUSTAR: 20.3699 BETAP: 0.0567867

Dec 18 1995 04:31:39:970PM951218030Jeff SchachterRF Power up to 0.7 MW. Te is good! 1.5 keV Density good too.
EFIT bombed - will rerun manually...

betap a little too low, and nustar a little to high. Already more power
than L-Mode.

Shot: 951218030 Time: 0.900000 Window: 0.300000
Bt = 5.25 T Ip = 0.62 MA Nel20 = 1.15 Te = 1.49 keV Pin = 1.43 MW
a = 21.8506 Zeff = 1.64

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.307535 0.451783 0.932794 0.349910
3.50000 0.413989 0.671515 1.13723 0.634083
5.30000 0.626897 1.16770 1.49964 1.45399
8.00000 0.946260 2.02186 1.97332 3.31276

RHOSTAR: 0.0106414 NUSTAR: 18.6203 BETAP: 0.0623402

Dec 18 1995 04:42:32:690PM951218031Jeff SchachterGolden! Nice nustar and beta.

compare to 12,20,21

Shot: 951218031 Time: 0.900000 Window: 0.300000
Bt = 5.26 T Ip = 0.62 MA Nel20 = 1.16 Te = 1.54 keV Pin = 1.48 MW
a = 21.8736 Zeff = 1.20

FIELD (T) IP (MA) NEL (e20/m3) TE (keV) PINPUT (MW)
--------- -------- ------------ -------- -----------
2.60000 0.307872 0.452375 0.965091 0.360049
3.50000 0.414443 0.672396 1.17661 0.652456
5.30000 0.627585 1.16924 1.55157 1.49612
8.00000 0.947298 2.02452 2.04164 3.40875

RHOSTAR: 0.0107926 NUSTAR: 12.7417 BETAP: 0.0645834

Next: try one shot for group 1 (shots 9,10,18,19): 715 kA, Nel=1.35

Dec 18 1995 04:54:42:870PM951218032Jeff SchachterTried to get Ip=715 kA, and Nel=1.35.
Te=1.41 keV. Pinput=1.44 MW if L-Mode.

Density rise was late (didn't take off to 1.3 until 800 ms). RF rose
with density. No good flat top to average over. Te a bit high (1.6 keV)
At 1.0 s, passes good point.

*** Reich just told me YAG data went bad sometime between 26 and 29.
Therefore my calculations of nustar and betap are bad. Try to redo
with ECE. May need another run if real temperature is off significantly
from what YAG was saying (and what I was basing my analysis on) ***

Dec 18 1995 05:04:59:400PM951218033Jeff SchachterFiducial. Not part of rhostar scan.

Dec 18 1995 05:13:24:410PM951218034Jeff SchachterAnother fiducial. Not part of rhostar scan. Good.

So John was good for 30 shots in a row. Not bad. Too bad about the
YAG though.

Physics Operator Comments
Dec 18 1995 08:40:24:750AMJohn GoetzRun 951218
In support of Mini-Proposal # 122A - Rho-star Scaling
The goal of this run is to obtain a set of plasmas at 2.6T, 3.5T,
5.3T and 8.0T that are suitable for rho-star scaling analysis.

Program for this run:
- Set up a diverted shot with: Ip Bt ne20 heating
.35 2.6 .43 OH
.48 3.5 .65 OH
.73 5.3 1.1 ICRF
1.1 8.0 2.0 ICRF
- Make plasmas with dimensionless parameters (except rho-star)
as similar as possible.

Dec 18 1995 08:41:38:450AMJohn GoetzRun 951218
In support of Mini-Proposal # 122A - Rho-star Scaling

Load 951212015
TF current waveform = -150 on [-1.5,+.019]; -73 on [+.02,1.1]; 0
switch closing times: EF1's @ 0.1 and OH's @ 0.12
V_OH1 spike = 250V @ 0.12; reduce to 100V from there on
IP = -350000kA
NL04 = 0.5e20
remove RF loading feedback from RCUR
coldstart hybrid - all matrices respond

Dec 18 1995 08:42:41:220AM951218001John GoetzShot 951218001:
OH coax resistance test

Results:
no CAMAC

Dec 18 1995 08:53:21:330AM951218002John GoetzShot 951218002:
OH coax resistance test

Results:
resistance check o.k.

Dec 18 1995 09:17:03:230AM951218003John GoetzShot 951218003:
Load 951212015
TF current waveform = -150 on [-1.5,+.019]; -73 on [+.02,1.1]; 0
switch closing times: EF1's @ 0.1 and OH's @ 0.12
V_OH1 spike = 250V @ 0.12; reduce to 100V from there on
IP = -350000kA
NL04 = 0.5e20
remove RF loading feedback from RCUR

Results:
plasma - disrupts @ 1.28
P_0 = 1.5e-5
IP = 0.35MA @ 0.7s; Bt=2.8T @ 0.8s; NL04=0.6e20

Dec 18 1995 09:29:09:910AM951218004John GoetzShot 951218004:
remove 6kA from TF current waveform
NL04 = 0.4e20 and PG3 = 30V

Results:
plasma - disrupts @ 1.24
Ip = 0.35MA @ 0.7s; Bt=2.6T @ 0.8s; NL04=0.5e20
H-mode spotted @ 0.81sec
outer gap is growing -> a small plasma

Dec 18 1995 10:15:55:770AM951218005John GoetzShot 951218005:
remove 6kA from TF current waveform pre-breakdown (-138kA)
RCUR ramped out to 0.675m
1/2 hour wait to cool Michelson
more gas early to lower Mo influx

Results:
Plasma - disr. @ 1.23
Bt = 2.6T @ 0.75 (breakdown @ 5.0T)
early Mo down

Dec 18 1995 10:33:38:420AM951218006John GoetzShot 951218006:
TF current waveform pre-breakdown = -133kA
more gas early to lower Mo influx
removed ramp in CLEARIN (constant @ -.005)
extend PG3 voltage to 1.0sec

Results:
plasma - disr. @ 1.21
Bt = 2.6T @ 0.7sec - breakdown @ (4.8T)
density constant
inner gap better, but still growing

Dec 18 1995 10:51:59:920AM951218007John GoetzShot 951218007:
setup for a 1.5sec shot by extending all appropriate waveforms
in the P's and V's to 1.5sec. Invert time for TF=1.5sec; PF's
=1.8sec; extend all gains to 1.5sec

Results:
plasma - disr. @ 1.57
current is drooping late and the lower x-point is climbing
up the divertor plates

Dec 18 1995 11:05:46:880AM951218008John GoetzShot 951218008:
extend voltages on EF2's and OH2's (missed on 7)
add 4msec of Ar
IC_EF4 gain to 3

Results:
plasma - disr. @ 1.58
magnetics data corrupted - no EFIT

Dec 18 1995 11:20:01:170AM951218009John GoetzShot 951218009:
RCUR = 0.68 (outer gap was 2.4cm)
remove half the Marmar puff

Results:
plasma - disrupts @ 1.63
RXL moving in; outer gap 1.4cm; inner gap 2.0cm

Dec 18 1995 11:42:27:160AM951218010John GoetzShot 951218010:
remove Marmar puff completely
CLEARIN = -.008
hold out RXL longer

Results:
plasma - disrupts @ 1.67

Dec 18 1995 11:57:38:860AM951218011John GoetzShot 951218011:
IP = -300000 and NL04 = 0.3e20 to scan Ohmic power

Results:
plasma - disrupts @ 1.66
Ohmic power down as requested
gaps constant

Dec 18 1995 12:09:07:590PM951218012John GoetzShot 951218012:
early gas to combat Mo influx

Results:
plasma - disrupts @ 1.64
NL04 = 0.45e20

Dec 18 1995 12:19:56:360PM951218013John GoetzShot 951218013:
PG3 = 28V
hold RXL at its starting value

Results:
plasma - disrupts @ 0.74
Dalpha rises @ 0.6 at crossover time, but no other
precursors or signatures

Dec 18 1995 12:28:08:780PM951218014John GoetzShot 951218014:
no changes

Results:
plasma - disrupts @ 1.54
RF turn on @ 1.46 causes droop in current and RXL to move in

Dec 18 1995 12:43:11:590PM951218015John GoetzShot 951218015:
IP = -400000

Results:
plasma - disrupts @ 0.65
no explanation for this one either

Dec 18 1995 12:55:00:710PM951218016John GoetzShot 951218016:
no changes

Results:
plasma - disrupts @ 1.52
o.gap = 1.0cm -> RCUR is not independent of current

Dec 18 1995 01:05:00:450PM951218017John GoetzShot 951218017:
NL04 = 0.5e20 (should give 0.6e20)

Results:
plasma - disrupts @ 1.64
NL04 = 0.61e20

Dec 18 1995 01:25:06:270PM951218018John GoetzShot 951218018:
IP = -500000 @ 0.122 (when gain switches on) then ramp to 470kA
NL04 = 0.69e20
TF current = 98kA (gives 3.5T)

Results:
plasma - disrupts @ 1.67
current droops
Bt = 3.65T
small gaps

Dec 18 1995 01:41:40:680PM951218019John GoetzShot 951218019:
TF current = 94kA (should give 3.5T)
slight ramp in IP
NL04 = 0.72e20
CLEARIN = -.008 & RCUR = 0.673

Results:
plasma - disrupts @ 1.68
within 5% on required dimensionless parameters

Dec 18 1995 02:04:45:090PM951218020John GoetzShot 951218020:
IP = -410000
NL04 = 0.57e20
RCUR = 0.675 & CLEARIN = -.009

Results:
plasma - disrupts @ 1.69
IP = 410kA; NL04=0.65e20
gaps = 1.3cm
H-mode @ 1.32??

Dec 18 1995 02:21:13:090PM951218021John GoetzShot 951218021:
NL04 = 0.58e20
RCUR = 0.676 & CLEARIN = -.007

Results:
plasma - disrupts @ 1.68
NL04=0.67e20; gaps = 1.5 cm
mini-disruption @ 0.2sec

Dec 18 1995 02:31:25:740PM951218022John GoetzShot 951218022:
reload 951218012 to get Zeff data

Results:
plasma - disr. @ 1.56
looks like 951218012

Dec 18 1995 02:44:20:190PM951218023John GoetzShot 951218023:
reload 951218021
IP = -530000
NL04 = 0.83e20
Bt = 3.5T

Results:
plasma - disrupts @ 1.25sec
discharge didn't take up the gas
all neutral light signals indicate an event @ 0.92sec
outer gap = 0.9cm

Dec 18 1995 03:00:46:090PM951218024John GoetzShot 951218023:
RCUR = 0.673cm

Results:
plasma - disrupts @ 1.67
not acceptable - no YAG data

Dec 18 1995 03:15:22:380PM951218025John GoetzShot 951218025:
rampdown time @ 1.2sec
TF invert = 1.2sec; PF invert time = 1.7sec
IP = -615000; NL04 = 1.15e20
TF current = -148kA (5.3T)
PG3 off at 1.2sec

Results:
plasma- disrupts @ 1.47
Bt=5.4T; current droops to 600kA; NL04 just makes it to 1.1e20
small gaps

Dec 18 1995 03:27:05:270PM951218026John GoetzShot 951218026:
TF current = -145kA
IP ramp to -630kA
PG3 = 34V
RCUR = 0.67 & CLEARIN = -.005

Results:
plasma - disrupts @ 1.52
current o.k.; field o.k.; density not quite there yet;
gaps o.k.

Dec 18 1995 03:37:37:340PM951218027John GoetzShot 951218027:
PG3 = 37V and 50V early in segment 2

Results:
plasma - disrupts @ 1.50
density flat but only 1.0 -> 1.1

Dec 18 1995 03:52:54:860PM951218028John GoetzShot 951218028:
PG3 = 41V and NL04 = 1.25e20

Results:
plasma - disrupts @ 1.46
NL04 = 1.1 -> 1.2
temperature too high

Dec 18 1995 04:03:09:350PM951218029John GoetzShot 951218029:
more PG3 between 0.2 and 0.5

Results:
plasma - disrupts @ 1.44
density acceptable
temperature too low

Dec 18 1995 04:26:50:290PM951218030John GoetzShot 951218030:
a pinch more RF power

Results:
plasma - disrupts @ 1.46
almost have a good match to previous dimensionless parameters

Dec 18 1995 04:41:51:680PM951218031John GoetzShot 951218031:
a pinch more RF power

Results:
plasma - disr. @ 1.45
good match to previous dimensionless parameters

Dec 18 1995 05:00:33:180PM951218032John GoetzShot 951218032:
IP = -715000
NL04 = 1.42e20
PG3 = 46V

Results:
plasma - disr. @ 1.47
density doesn't rise fast enough
not much right on this shot

Dec 18 1995 05:06:08:650PM951218033John GoetzShot 951218033:
load 951212017 for fiducial shot

Results:
strong fizzle
too much Br

Dec 18 1995 05:29:16:420PM951218034John GoetzShot 951218034:
BR_0 = .0064

Results:
plasma - all the way down
acceptable fiducial

Engineering Operator Comments
ShotTimeTypeStatusComment
108:33:24:380AMTestOk
208:48:40:500AMTestOk
309:02:59:040AMPlasmaOk
409:15:52:510AMPlasmaOk
510:04:57:030AMPlasmaOk
610:16:27:570AMPlasmaOk
710:34:15:910AMPlasmaOk
810:52:41:350AMPlasmaOk
911:08:13:950AMPlasmaOk
1011:32:07:880AMPlasmaOk
1111:45:13:150AMPlasmaOk
1211:58:12:960AMPlasmaOk
1312:09:59:690PMPlasmaOk
1412:19:03:120PMPlasmaOk
1512:31:45:780PMPlasmaOk
1612:43:30:890PMPlasmaOk
1712:55:49:550PMPlasmaOk
1801:13:12:080PMPlasmaOk
1901:27:58:790PMPlasmaOk
2001:42:43:870PMPlasmaOk
2102:07:48:900PMPlasmaOk
2202:22:24:360PMPlasmaOk
2302:32:48:930PMPlasmaOk
2402:46:39:550PMPlasmaOk
2503:03:42:680PMPlasmaOk
2603:16:21:480PMPlasmaOk
2703:28:39:030PMPlasmaOk
2803:42:04:820PMPlasmaOk
2903:55:27:930PMPlasmaOk
3004:06:37:470PMPlasmaOk
3104:30:53:100PMPlasmaOk
3204:45:26:720PMPlasmaOk
3305:01:00:810PMPlasmaOk
3405:11:47:370PMPlasmaOk